MacNite Mods and RRF3.x for Trident

[MacNite]

• [x] The mod, firmware configuration or slicer profile is in the correct category folder. Printable mods go to printer_mods/, firmware configurations go to firmware_configurations/, slicer profiles go to slicer_profiles/. Create a subfolder with your name, and place the mods in a subfolder with a descriptive name within that folder, e.g.: /printer_mods/FHeilmann/flux_capacitor
• [x] Folders names MUST NOT contain spaces. If possible, make sure file names also do not contain any spaces.
• [x] For each mod, add a small README.md file to its folder with a short description of what the mod accomplishes. This readme can be used to add pictures, give assembly instructions or specify a bill of materials if the mod requires additional hardware.
• [x] The PR modifies the top-level README.md of the category folder adding the contribution to the table. Read the top part of the file for instructions on how to do this. Please preserve the alphabetical ordering while adding new rows. Make sure to fill out the compatibility matrix to indicate which versions of the Voron printer the submission is compatible with.
• [x] The mod/configuration/profile has been tested by the person submitting the mod and/or other Voron users. Make sure to add information about how the mod was tested below.
• [x] The mod is not merely a slight modification of an official Voron part, configuration or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile which only modifies a few values). (When in doubt, contact one of the admins in the Voron discord before submitting the PR)
• [x] Submitted STLs are printable without support. (If the mod does not meet this criterion join the Voron discord and ask the other users for advice on how to modify the mod such that it does not require supports)
• [x] Submitted STL files are not corrupt. (This can be tested by opening the STL in PrusaSlicer and checking if mesh errors are reported.)
• [x] Submitted STL files are oriented and scaled properly for printing.
• [x] Submitted firmware configs or slicer profiles contain no sensitive data (e.g. API keys).

Which mods/configurations/profiles are added by this PR?

How was it tested?

Any background context you want to provide?

Screenshots (if appropriate)

Further notes

[MacNite]

Which mods/configurations/profiles are added by this PR? Firmware RRF3 for Voron Trident Printer_Mods: MacNite: Duet 6HC + 3HC Mount, PanelDue 7i Mount, PanelDue5i Mount, FIlament Runout Sensor How was it tested? Printed and used in my Voron V1.8 and Trident.

[cbc02009]

It might be a good idea to separate the mods from the reprap stuff. I could approve the mods, but I don't know enough about reprap to verify that portion.

[MacNite]

OK,

Is there any easy way to Split this pull request or do I have to create 2 seperate new ones?

Thanks for your Help, Max

[cbc02009]

I would just create a separate pull request for the RRF files and modify this to only include the mods, but if it's easier to create two new pull requests you can do that too.

[newphreak]

@MacNite can you make the requested changes?

[MacNite]

@MacNite can you make the requested changes?

Sorry, I am Not able to do that because I do not know how to use GitHub for this and do Not have the time to learn IT.

[cbc02009]

@MacNite just delete the RRF files from this PR and once it's merged create a new PR with just the RRF files.

[MacNite]

@MacNite just delete the RRF files from this PR and once it's merged create a new PR with just the RRF files.

Ok, I have done this.

[cbc02009]

@MacNite the RRF files are still in the PR (look at the Files Changed tab at the top of the page). Did you remember to push the changes to github?

[FHeilmann]

@MacNite if you'd still like to submit this mod, please reach out to me (Haribro) on discord. Unfortunately this PR is too far gone to get it into the main repo without tons of work, and it'll be easier if I assist you to start from scratch