Add Nevermore Activated Carbon Filter

[eduncan911]

• [X] The mod, firmware configuration or slicer profile is in the correct category folder. Printable mods go to printer_mods/, firmware configurations go to firmware_configurations/, slicer profiles go to slicer_profiles/. Create a subfolder with your name, and place the mods in a subfolder with a descriptive name within that folder, e.g.: /printer_mods/FHeilmann/flux_capacitor
• [X] Folders names MUST NOT contain spaces. If possible, make sure file names also do not contain any spaces.
• [X] For each mod, add a small README.md file to its folder with a short description of what the mod accomplishes. This readme can be used to add pictures, give assembly instructions or specify a bill of materials if the mod requires additional hardware.
• [X] The PR modifies the top-level README.md of the category folder adding the contribution to the table. Read the top part of the file for instructions on how to do this. Please preserve the alphabetical ordering while adding new rows. Make sure to fill out the compatibility matrix to indicate which versions of the Voron printer the submission is compatible with.
• [X] The mod/configuration/profile has been tested by the person submitting the mod and/or other Voron users. Make sure to add information about how the mod was tested below.
• [X] The mod is not merely a slight modification of an official Voron part, configuration or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile which only modifies a few values). (When in doubt, contact one of the admins in the Voron discord before submitting the PR)
• [X] Submitted STLs are printable without support. (If the mod does not meet this criterion join the Voron discord and ask the other users for advice on how to modify the mod such that it does not require supports)
• [X] Submitted STL files are not corrupt. (This can be tested by opening the STL in PrusaSlicer and checking if mesh errors are reported.)
• [X] Submitted STL files are oriented and scaled properly for printing.
• [X] Submitted firmware configs or slicer profiles contain no sensitive data (e.g. API keys).

Which mods/configurations/profiles are added by this PR?

Nevermore Micro V4 and V5 Duo !!

How was it tested?

Dozens of people have printed and actively using it, and many variants.

Any background context you want to provide?

It's the Nevermore Micro !! :)

I have been working with the original Nevermore author, @0ndsk4, to clean up the original repository, add a bunch of information, some icky images, create clean and precise BOMs, and get this published.

With his direct permission, I am publishing all of his work for him, from his new Github Org.

The original repository is being deprecated in favor of this new repository we are now publishing mods from, https://github.com/nevermore3d, including the VoronUsers branch located there.

Screenshots (if appropriate)

Further notes

It's the Nevermore !! :) Finally, merged into the VoronUsers group!

[KiloQubit]

This is not a review yet, but @0ndsk4 can you please make a comment on this PR confirming that you're ok with it?

Also, from a quick glance I see that some file and directory names contain spaces - please remove spaces from all file and directory names.

[0ndsk4]

This is not a review yet, but @0ndsk4 can you please make a comment on this PR confirming that you're ok with it?

well, yeah, it’s the same files everyone has been using for months already, I’ve just gotten well needed help cleaning up my repo. It was always the intention to some day merge my fork with user mods. I just never used git before, and haven’t had time to learn how to use it efficiently myself yet so I’m happy to have help to get it done.

/0ndsk4

[eduncan911]

Removed the 1 space. This PR is ready for review.

[eduncan911]

This PR is ready for review and merging.

[bdbell]

There appears to be an error in the STL or object V5_Duo/1.8/V18_cartridge_RC2.stl:

Also found on V5_Duo/V2/Duo_Cartridge.stl and V5_Duo/V2/Duo_XL_Cartridge.stl

[eduncan911]

@0ndsk4 have you updated these files in the main repo? if so, I can copy them over.

[0ndsk4]

There appears to be an error in the STL or object V5_Duo/1.8/V18_cartridge_RC2.stl:

Also found on V5_Duo/V2/Duo_Cartridge.stl and V5_Duo/V2/Duo_XL_Cartridge.stl

That’s no error as far as I can see. It’s built in support, supposed to be removed after the print.

[newphreak]

@eduncan911 can you update it with the latest touches from the Nevermore_Micro repo?

[eduncan911]

@newphreak rebased and all set!

[FHeilmann]

Hi,

I want to thank you for your submission and want to personally apologize that your submission has not gotten the review it deserves. We are in the process to restructure the repo to streamline reviews and hopefully solve this issue in the future.

Unfortunately, this means that we will require you to resubmit the mod under the new system.

Please check here for details and instructions on how to proceed. If you have any questions, please reach out in the #voronuser_mods channel on the VoronDesign discord. If you have since moved on from this mod and don't want to resubmit, no further action is necessary from your side.

Bests,

Florian a.k.a. Haribro