Voron-0
Voron-0 copied to clipboard
VoronDesign
Voron 0 CoreXY 3D Printer design
I posted an [issue](https://github.com/VoronDesign/Voron-0/issues/308#issue-1788425942) previously, and now I upgraded the suggested idler design even more - the standard one couldn't hold very flexible TPU even a tiny bit, now it...
There really needs to be way to make accessing the extruder grubscrew in the Mini Stealthburner much easier. I cannot at all see the grubscrew when the manual tells me...
Page 170 of version 2023-12-19 assembly manual shows installation of the "Anti squish thingymajig". Picture shows a screw, but no indication of what size screw. I suggest adding text that...
This is my summary of comments / suggested fixes to the v0.2r1 manual after having completed a build. Please indicate if you would like me to create individual issues for...
I noticed I have some of the panels misaligned, so I gotta fix it. This issue is here to hold me accountable. Items to fix: - panel placement. - clip...
When enlarging the hole by 0.5mm for the first 4mm, the iFixit tool would effectively tighten the screw, as the bit is slightly too short. This should be applied for...
On the Z motor mount, the lower diagram, I really needed M3x10, not M3x8. Since they are hard to install, it would be good to have it right from the...
I have the feeling that a 100mm top hat is pretty much suggested for the V0 these days. Would it be a idéa to resize the CAD top-hat to be...