Voron-0

Voron-0 copied to clipboard

Manual: Hex nut size at p.18

2

 Should it be M2 nuts instead of M3?

nhchiu

All the things I've come across so far are by no means anything major, they just appear to be things that aren't quite right. To stop this issue getting spammed...

Alexander-T-Moss

Update CAD assemblies to have thicker MiniSB front cowling and revised display encoder knob

kyleisah

Guidler has too much play - possible solution

4

Ministealthburner has an issue that the amount of play in the guidler is significant enough to cause issues when extruding. It could grab filament too weak for fast printing, and...

Matszwe02

Guidler prone to slight deformation under higher temperatures, resulting in loss in gripping power

2

hey guys, the current guidler is not sufficiently reinforced to keep straight under load and higher temperatures. After deformation, it shows the same failure mode as https://github.com/VoronDesign/Voron-0/issues/308 that you can...

probably-Erwins-Cat

Page 104: Unclear text about the filament sensor

1

The text in the manual, on page 104, states: "Prepare the switch for the Filament runout sensor by soldering wire to t**he two outer terminal**. " (my emphasis) However, the...

gregersn

Change assembly manual - let Z motor be assembled earlier

2

Move z motor assembly from page 107/108 to page 58. Mounting the Z-motor with the bottom acrylic panel is a pain - a single allen key barely fits, and if...

Matszwe02

Distance between Lower Stain Relief Body Screws and Top A/B Mounts too small to account for compounding tolerances

2

I noticed that the screw head is ever so slightly colliding with my top A/B motor mounts. I would hazard a guess this is the case for several people and...

ChaosBlades

Request to add printed parts list at begining of each section.

8

Im printing the parts as I go, and the manual doesnt always tell you what the part is called. Im having to find the part on the cad to find...

Faenum

panel mounts STLs for other thickness like V0.1 .. 2mm would be very nice

1

in germany is 2mm or 4mm easier to get i am not sure if it is possible, would be nice if we can generate some more panel sizes like in...

d0m1n1qu3