Problem regarding Probe 2*NP 2.4

[Huang-Yu-Chen]

Hi!

Is the 2*NP 2.4 meant to be a parallel dual NP 2.0 implant? When I load the probe, there's always an 90 degree pitch of the probe (like the figure below)

This causes the AP, ML, DV coordinates to be wrong as well, for example, if I press "Z" to move it more ventral, the probe actually moves sideways (After I rotate the pitch back to 0), rather then going down.

And I wondering whether there's a parameter to adjust the inter-probe distance?

Thanks in advance!

[dbirman]

Hi!

Is the 2*NP 2.4 meant to be a parallel dual NP 2.0 implant? When I load the probe, there's always an 90 degree pitch of the probe (like the figure below)

This causes the AP, ML, DV coordinates to be wrong as well, for example, if I press "Z" to move it more ventral, the probe actually moves sideways (After I rotate the pitch back to 0), rather then going down.

And I wondering whether there's a parameter to adjust the inter-probe distance?

Thanks in advance!

This is definitely a mistake. I'll look into fixing it and getting a new build up.

[dbirman]

We've decided to deprecate this probe, we don't have the capability to support it anymore.