ha-asusrouter
ha-asusrouter copied to clipboard
Vaskivskyi
[Bug] Missing sensors
The problem
@sezlony, hey. Let's troubleshoot your missing sensors. Please, list the sensors which are missing. Do you use router mode in the integration or any other (e.g. ap, aimesh node, media bridge)
Your device model
RT-AC1200G+
Firmware type
Stock
Firmware version
3.0.0.4.382.52272
Integration version with the issue
Method of the integration installation
HACS
What version and type of Home Assistant installation do you use
Core
Is there anything useful in the logs?
No response
Diagnostics information
No response
Additional information
No response
ok, let me see:
yes, I'm using plain router mode, nothing fancy
missing all the speed monitoring sensors, like up-download via bridge, wan etc.
since they became useless with the upgrade I got in panic and my first move was to delete them hoping the integration will rediscover them, but...
Can you please check, whether all the other sensors and other entities are present? Some of them might be disabled in HA if you haven't yet enabled them
Including, CPU, RAM, LAN / WAN ports, WLAN (Wireless) and GWLAN and so on
This would help find out whether the issue is with querying or processing one endpoint or some more general
I have 54 entities present, a lot of them is disabled by the integration, these are only device trackers and I didn't enable them as I considered them unnecessary
other critical entities like those you listed are present and working fine (as far as I can tell), I'm using their data
only thing disabled intensionally by me is AiMesh, although I can't recall where and how I managed to do that
Can you please share the diagnostics provided by AsusRouter? You can get the file by clicking Download diagnostics. You can either share it here or send to [email protected]
Still trying to figure it out or reproduce...
Yes, please, @Rembock, diagnostics would help. Or at least your device model and FW version
Device model
RT-AC58U
Firmware type
Stock
Firmware version
3.0.0.4.382.52134_gdc87a3c
Integration version with the issue
Method of the integration installation
HACS
What version and type of Home Assistant installation do you use
Container
Is there anything useful in the logs?
Don't know
Diagnostics information
config_entry-asusrouter-421eef4253717cef6499cf94a42af6dc.json.txt
Additional information
Issue started about a month ago
I'm just seeing this issue, but this is my first time setting up this integration so I never got to see the speed sensors in the first place.
Device model ZenWiFi AC Mini (CD6)
Firmware type Stock
Firmware version 3.0.0.4.386_49693-gecfd731
Integration version with the issue 0.28.0
Method of the integration installation HACS
What version and type of Home Assistant installation do you use HAOS
Is there anything useful in the logs? Don't know
Diagnostics information config_entry-asusrouter-061ad4e9feb33132b97aa3043785bb5a (1).json
Additional information I see that my router is in the expected to be working but not tested category, so if there is anything you'd like me to check in that regard I'm happy to help. I've also attached a diagnostics log, but I don't see much in there that's particularly revealing in there.
home-assistant_asusrouter_2024-02-07T21-48-50.224Z.log
no luck with 0.29.0 either, the formerly (e.g. 0.22.0) present network speed sensors are still gone, no change noticed in comparison with 0.28.0
@sezlony that's true, but that's because there's nothing about this issue mentioned in the release changelog :)
yeah, I know and you could've been right, unless you knew that Vaskivskyi himself sent a direct mail adivsing: "Please, check with version 0.29.0. If the issue persists, please..."
:)
Issue still exists, devices which are trackable are 'disabled by integration' during startup
also seeing same issue - looking specifically for the speed test sensors!
ET12/Router mode.. can give any other info if that will help..
