ValleyRackFree
ValleyRackFree copied to clipboard
ValleyAudio
plateau not sending verb
HI If I use the -18db setting no wet signal is sent. If i change to 0db then there is teh verb but also distortion. this is in vcv rack 2
Hi @XtremeSounds , I've tested out the patch and the plugin and I was unable to recreate the fault. Plateau is definitely working and matches the behaviour of the older v1 Plateau, so maybe the reverb was just inaudible in -18 dB mode? At 0 dB the module is pretty sensitive.
Have you had any problems since you filed this issue?
Hi yeah thanks. Yes to me it just seems something with vcv rack 2 is different soundwise like you said more sensitive to input and output volumes. Thanks for looking I will just keep working at it. Btw have you thought of making a shimmer verb? Or some other verb types?
From: Dale Johnson @.> Sent: Monday, May 2, 2022 7:03 PM To: ValleyAudio/ValleyRackFree @.> Cc: XtremeSounds @.>; Mention @.> Subject: Re: [ValleyAudio/ValleyRackFree] plateau not sending verb (Issue #79)
Hi @XtremeSounds https://github.com/XtremeSounds , I've tested out the patch and the plugin and I was unable to recreate the fault. Plateau is definitely working and matches the behaviour of the older v1 Plateau, maybe reverb was just inaudible in -18 dB mode? At 0 dB the module is pretty sensitive.
Have you had any problems since you filed this issue?
— Reply to this email directly, view it on GitHub https://github.com/ValleyAudio/ValleyRackFree/issues/79#issuecomment-1115448858 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AV3M5RAJOQWPOYE3KJANIV3VIBNLFANCNFSM5T43PZIA . You are receiving this because you were mentioned.Message ID: @.***>