Topograph: Reset Sync Intermittent

[midiguru23]

I'm finding that it's not possible to get a reliable reset from Topograph or uGraph. They're at 1.1.0, and VCV is at 1.1.6. Sometimes they start in sync with other devices after a Reset when the first clock is received, but other times there is a one-clock-pulse delay. That is, the modules fail to start until they receive the 2nd clock pulse, which puts them out of sync with everything else. Oddly enough, the two modules always behave identically (either syncing or being late) when they're used side by side. This suggests to me that there's something in the code that points to the wrong place depending on when exactly the Reset command is received. The video shows the problem (which occurs sometimes, but not other times) at 8 ppqn. At 24 ppqn the delay is shorter, but the phenomenon is exactly the same.

valley_start_sync_video.zip

[Petervos2018]

Hi Jim, this is the same video you posted on facebook, just remove the run connectors from the clock to the topographs, and all your troubles will be over. Greetings Peter.