gnome-shell-extension-freon
gnome-shell-extension-freon copied to clipboard
getSmartData(...) temperature is undefined
Does not seem to work when HDD/SDD temperature utility is smartcli
❯ sudo smartctl -a /dev/nvme0n1
smartctl 7.3 2021-06-26 r5227 [x86_64-linux-5.13.4-arch2-1] (local build)
Copyright (C) 2002-21, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: KINGSTON RBUSNS8154P3256GJ1
Serial Number: 50026B7682CFDBD6
Firmware Version: E8FK12.3
PCI Vendor/Subsystem ID: 0x2646
IEEE OUI Identifier: 0x0026b7
Total NVM Capacity: 256,060,514,304 [256 GB]
Unallocated NVM Capacity: 0
Controller ID: 0
NVMe Version: 1.2
Number of Namespaces: 1
Namespace 1 Size/Capacity: 256,060,514,304 [256 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 0026b7 682cfdbd65
Local Time is: Mon Jul 26 00:08:30 2021 IST
Firmware Updates (0x12): 1 Slot, no Reset required
Optional Admin Commands (0x0007): Security Format Frmw_DL
Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Log Page Attributes (0x04): Ext_Get_Lg
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 84 Celsius
Critical Comp. Temp. Threshold: 88 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 7.90W 0.0790W - 0 0 0 0 600 600
1 + 7.90W 0.0790W - 0 0 0 0 600 600
2 + 7.90W 0.0790W - 0 0 0 0 600 600
3 - 0.1000W 0.0790W - 3 3 3 3 1000 1000
4 - 0.0050W 0.0790W - 4 4 4 4 400000 90000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 1
1 - 4096 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 44 Celsius
Available Spare: 100%
Available Spare Threshold: 100%
Percentage Used: 19%
Data Units Read: 58,251,505 [29.8 TB]
Data Units Written: 41,816,381 [21.4 TB]
Host Read Commands: 973,667,245
Host Write Commands: 700,076,902
Controller Busy Time: 1,947
Power Cycles: 1,615
Power On Hours: 1,636
Unsafe Shutdowns: 30
Media and Data Integrity Errors: 0
Error Information Log Entries: 508
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 2: 44 Celsius
Error Information (NVMe Log 0x01, 16 of 16 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS
0 508 0 0x000a 0x0004 - 4009754624 1 -
1 507 0 0x000a 0x0004 - 4009754624 1 -
2 506 0 0x000a 0x0004 - 4009754624 1 -
3 505 0 0x000a 0x0004 - 4009754624 1 -
4 504 0 0x000a 0x0004 - 4009754624 1 -
5 503 0 0x000a 0x0004 - 4009754624 1 -
6 502 0 0x000a 0x0004 - 4009754624 1 -
7 501 0 0x000a 0x0004 - 4009754624 1 -
8 500 0 0x000a 0x0004 - 4009754624 1 -
9 499 0 0x000a 0x0004 - 4009754624 1 -
10 498 0 0x000a 0x0004 - 4009754624 1 -
11 497 0 0x000a 0x0004 - 4009754624 1 -
12 496 0 0x000a 0x0004 - 4009754624 1 -
13 495 0 0x000a 0x0004 - 4009754624 1 -
14 494 0 0x000a 0x0004 - 4009754624 1 -
15 493 0 0x000a 0x0004 - 4009754624 1 -
❯ sudo smartctl -a /dev/sda
smartctl 7.3 2021-06-26 r5227 [x86_64-linux-5.13.4-arch2-1] (local build)
Copyright (C) 2002-21, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda Pro Compute
Device Model: ST1000LM049-2GH172
Serial Number: WGS5FF5L
LU WWN Device Id: 5 000c50 0c04c2325
Firmware Version: ACM1
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database 7.3/5224
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jul 26 00:09:49 2021 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 122) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 062 062 006 Pre-fail Always - 222406705
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 037 037 020 Old_age Always - 65535
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 16
7 Seek_Error_Rate 0x000f 085 060 045 Pre-fail Always - 306417903
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 7915 (181 166 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1590
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 051 040 040 Old_age Always In_the_past 49 (Min/Max 28/49)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 89
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 55
193 Load_Cycle_Count 0x0032 029 029 000 Old_age Always - 142291
194 Temperature_Celsius 0x0022 049 060 000 Old_age Always - 49 (0 19 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4275 (47 146 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 14873547711
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 19041213482
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 7841 hours (326 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 03 06 02 0c 40 Device Fault; Error: ABRT at LBA = 0x000c0206 = 786950
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 ff ff ff 4f 00 00:38:50.417 WRITE FPDMA QUEUED
ea 00 00 00 00 00 a0 00 00:38:50.415 FLUSH CACHE EXT
ef 10 02 00 00 00 a0 00 00:38:50.406 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:38:50.379 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:38:50.378 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7583 -
# 2 Short offline Completed without error 00% 6772 -
# 3 Short offline Completed without error 00% 3516 -
# 4 Short offline Completed without error 00% 3394 -
# 5 Short offline Completed without error 00% 2968 -
# 6 Short offline Completed without error 00% 757 -
# 7 Short offline Completed without error 00% 190 -
# 8 Short offline Completed without error 00% 107 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.