evok icon indicating copy to clipboard operation
evok copied to clipboard

Published 20 hours ago • verified publisher icon UniPiTechnology

EVOK fails to install in image similar to Open Source OS

Open mhoejgaard opened this issue 4 years ago • 1 comments

Prerequisites

  • [Release ] Are you running the latest Master or the latest release version?
  • [Yes ] Did you try to reinstall EVOK?
  • [Yes ] Did you perform a cursory search on the [forum] and [google]?

Log files needed

Include the output of the following commands on your Neuron/UniPi device:

sudo su
cat /var/log/evok.access.log
ps -fax
cat /var/log/evok.log

Description

Cannot install EVOK in 2018-11-13-raspbian-stretch (which is what the Open Source OS is based on) using instructions in the README.

I am attempting an ancient image because Raspberry OS is hit by this issue: https://github.com/UniPiTechnology/evok/issues/84

Device: Unipi Neuron M193.

Steps to Reproduce

  1. Flash to an SD card with BalenaEtcher.
  2. Enable ssh by adding a file ssh to the boot partition
  3. Boot the Unipi and follow the instructions here: (https://github.com/UniPiTechnology/evok#installation-process-on-neuron-family-controllers-with-fresh-rapsbian-image).

Expected behavior: [What you expected to happen] EVOK is installed.

Actual behavior: [What actually happened] EVOK fails to install.

pi@raspberrypi:~ $ sudo su
root@raspberrypi:/home/pi# apt-get install nginx
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  fontconfig-config fonts-dejavu-core libfontconfig1 libgd3 libjbig0
  libnginx-mod-http-auth-pam libnginx-mod-http-dav-ext libnginx-mod-http-echo
  libnginx-mod-http-geoip libnginx-mod-http-image-filter
  libnginx-mod-http-subs-filter libnginx-mod-http-upstream-fair
  libnginx-mod-http-xslt-filter libnginx-mod-mail libnginx-mod-stream libtiff5
  libwebp6 libxpm4 libxslt1.1 nginx-common nginx-full
Suggested packages:
  libgd-tools fcgiwrap nginx-doc ssl-cert
The following NEW packages will be installed:
  fontconfig-config fonts-dejavu-core libfontconfig1 libgd3 libjbig0
  libnginx-mod-http-auth-pam libnginx-mod-http-dav-ext libnginx-mod-http-echo
  libnginx-mod-http-geoip libnginx-mod-http-image-filter
  libnginx-mod-http-subs-filter libnginx-mod-http-upstream-fair
  libnginx-mod-http-xslt-filter libnginx-mod-mail libnginx-mod-stream libtiff5
  libwebp6 libxpm4 libxslt1.1 nginx nginx-common nginx-full
0 upgraded, 22 newly installed, 0 to remove and 0 not upgraded.
Need to get 3,982 kB of archives.
After this operation, 8,423 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libjbig0 armhf 2.1-3.1 [27.5 kB]
Get:2 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf fonts-dejavu-core all 2.37-1 [1,068 kB]
Get:3 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf fontconfig-config all 2.11.0-6.7 [271 kB]
Get:4 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libfontconfig1 armhf 2.11.0-6.7 [313 kB]
Get:5 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libtiff5 armhf 4.0.8-2+deb9u5 [220 kB]
Get:6 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libwebp6 armhf 0.5.2-1 [202 kB]
Get:7 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libxpm4 armhf 1:3.5.12-1 [43.6 kB]
Get:8 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libgd3 armhf 2.2.4-2+deb9u5 [114 kB]
Get:9 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf nginx-common all 1.10.3-1+deb9u5 [105 kB]
Get:10 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libnginx-mod-http-auth-pam armhf 1.10.3-1+deb9u5 [85.9 kB]
Get:11 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libnginx-mod-http-dav-ext armhf 1.10.3-1+deb9u5 [87.5 kB]
Get:12 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libnginx-mod-http-echo armhf 1.10.3-1+deb9u5 [95.6 kB]
Get:13 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libnginx-mod-http-geoip armhf 1.10.3-1+deb9u5 [87.0 kB]
Get:14 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libnginx-mod-http-image-filter armhf 1.10.3-1+deb9u5 [89.8 kB]
Get:15 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libnginx-mod-http-subs-filter armhf 1.10.3-1+deb9u5 [89.0 kB]
Get:16 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libnginx-mod-http-upstream-fair armhf 1.10.3-1+deb9u5 [89.2 kB]
Get:17 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libxslt1.1 armhf 1.1.29-2.1+deb9u2 [214 kB]
Get:18 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libnginx-mod-http-xslt-filter armhf 1.10.3-1+deb9u5 [88.6 kB]
Get:19 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libnginx-mod-mail armhf 1.10.3-1+deb9u5 [113 kB]
Get:20 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libnginx-mod-stream armhf 1.10.3-1+deb9u5 [106 kB]
Get:21 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf nginx-full armhf 1.10.3-1+deb9u5 [390 kB]
Get:22 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf nginx all 1.10.3-1+deb9u5 [82.0 kB]
Fetched 3,982 kB in 4s (949 kB/s) 
Preconfiguring packages ...
Selecting previously unselected package libjbig0:armhf.
(Reading database ... 34847 files and directories currently installed.)
Preparing to unpack .../00-libjbig0_2.1-3.1_armhf.deb ...
Unpacking libjbig0:armhf (2.1-3.1) ...
Selecting previously unselected package fonts-dejavu-core.
Preparing to unpack .../01-fonts-dejavu-core_2.37-1_all.deb ...
Unpacking fonts-dejavu-core (2.37-1) ...
Selecting previously unselected package fontconfig-config.
Preparing to unpack .../02-fontconfig-config_2.11.0-6.7_all.deb ...
Unpacking fontconfig-config (2.11.0-6.7) ...
Selecting previously unselected package libfontconfig1:armhf.
Preparing to unpack .../03-libfontconfig1_2.11.0-6.7_armhf.deb ...
Unpacking libfontconfig1:armhf (2.11.0-6.7) ...
Selecting previously unselected package libtiff5:armhf.
Preparing to unpack .../04-libtiff5_4.0.8-2+deb9u5_armhf.deb ...
Unpacking libtiff5:armhf (4.0.8-2+deb9u5) ...
Selecting previously unselected package libwebp6:armhf.
Preparing to unpack .../05-libwebp6_0.5.2-1_armhf.deb ...
Unpacking libwebp6:armhf (0.5.2-1) ...
Selecting previously unselected package libxpm4:armhf.
Preparing to unpack .../06-libxpm4_1%3a3.5.12-1_armhf.deb ...
Unpacking libxpm4:armhf (1:3.5.12-1) ...
Selecting previously unselected package libgd3:armhf.
Preparing to unpack .../07-libgd3_2.2.4-2+deb9u5_armhf.deb ...
Unpacking libgd3:armhf (2.2.4-2+deb9u5) ...
Selecting previously unselected package nginx-common.
Preparing to unpack .../08-nginx-common_1.10.3-1+deb9u5_all.deb ...
Unpacking nginx-common (1.10.3-1+deb9u5) ...
Selecting previously unselected package libnginx-mod-http-auth-pam.
Preparing to unpack .../09-libnginx-mod-http-auth-pam_1.10.3-1+deb9u5_armhf.deb ...
Unpacking libnginx-mod-http-auth-pam (1.10.3-1+deb9u5) ...
Selecting previously unselected package libnginx-mod-http-dav-ext.
Preparing to unpack .../10-libnginx-mod-http-dav-ext_1.10.3-1+deb9u5_armhf.deb ...
Unpacking libnginx-mod-http-dav-ext (1.10.3-1+deb9u5) ...
Selecting previously unselected package libnginx-mod-http-echo.
Preparing to unpack .../11-libnginx-mod-http-echo_1.10.3-1+deb9u5_armhf.deb ...
Unpacking libnginx-mod-http-echo (1.10.3-1+deb9u5) ...
Selecting previously unselected package libnginx-mod-http-geoip.
Preparing to unpack .../12-libnginx-mod-http-geoip_1.10.3-1+deb9u5_armhf.deb ...
Unpacking libnginx-mod-http-geoip (1.10.3-1+deb9u5) ...
Selecting previously unselected package libnginx-mod-http-image-filter.
Preparing to unpack .../13-libnginx-mod-http-image-filter_1.10.3-1+deb9u5_armhf.deb ...
Unpacking libnginx-mod-http-image-filter (1.10.3-1+deb9u5) ...
Selecting previously unselected package libnginx-mod-http-subs-filter.
Preparing to unpack .../14-libnginx-mod-http-subs-filter_1.10.3-1+deb9u5_armhf.deb ...
Unpacking libnginx-mod-http-subs-filter (1.10.3-1+deb9u5) ...
Selecting previously unselected package libnginx-mod-http-upstream-fair.
Preparing to unpack .../15-libnginx-mod-http-upstream-fair_1.10.3-1+deb9u5_armhf.deb ...
Unpacking libnginx-mod-http-upstream-fair (1.10.3-1+deb9u5) ...
Selecting previously unselected package libxslt1.1:armhf.
Preparing to unpack .../16-libxslt1.1_1.1.29-2.1+deb9u2_armhf.deb ...
Unpacking libxslt1.1:armhf (1.1.29-2.1+deb9u2) ...
Selecting previously unselected package libnginx-mod-http-xslt-filter.
Preparing to unpack .../17-libnginx-mod-http-xslt-filter_1.10.3-1+deb9u5_armhf.deb ...
Unpacking libnginx-mod-http-xslt-filter (1.10.3-1+deb9u5) ...
Selecting previously unselected package libnginx-mod-mail.
Preparing to unpack .../18-libnginx-mod-mail_1.10.3-1+deb9u5_armhf.deb ...
Unpacking libnginx-mod-mail (1.10.3-1+deb9u5) ...
Selecting previously unselected package libnginx-mod-stream.
Preparing to unpack .../19-libnginx-mod-stream_1.10.3-1+deb9u5_armhf.deb ...
Unpacking libnginx-mod-stream (1.10.3-1+deb9u5) ...
Selecting previously unselected package nginx-full.
Preparing to unpack .../20-nginx-full_1.10.3-1+deb9u5_armhf.deb ...
Unpacking nginx-full (1.10.3-1+deb9u5) ...
Selecting previously unselected package nginx.
Preparing to unpack .../21-nginx_1.10.3-1+deb9u5_all.deb ...
Unpacking nginx (1.10.3-1+deb9u5) ...
Setting up libjbig0:armhf (2.1-3.1) ...
Setting up fonts-dejavu-core (2.37-1) ...
Setting up nginx-common (1.10.3-1+deb9u5) ...
Created symlink /etc/systemd/system/multi-user.target.wants/nginx.service → /lib/systemd/system/nginx.service.
Setting up libnginx-mod-http-subs-filter (1.10.3-1+deb9u5) ...
Setting up libtiff5:armhf (4.0.8-2+deb9u5) ...
Processing triggers for sgml-base (1.29) ...
Setting up libxslt1.1:armhf (1.1.29-2.1+deb9u2) ...
Processing triggers for libc-bin (2.24-11+deb9u4) ...
Processing triggers for systemd (232-25+deb9u12) ...
Setting up libnginx-mod-http-auth-pam (1.10.3-1+deb9u5) ...
Setting up libnginx-mod-http-dav-ext (1.10.3-1+deb9u5) ...
Setting up libnginx-mod-mail (1.10.3-1+deb9u5) ...
Setting up libxpm4:armhf (1:3.5.12-1) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up libnginx-mod-http-xslt-filter (1.10.3-1+deb9u5) ...
Setting up libnginx-mod-http-upstream-fair (1.10.3-1+deb9u5) ...
Setting up libnginx-mod-http-geoip (1.10.3-1+deb9u5) ...
Setting up libwebp6:armhf (0.5.2-1) ...
Setting up fontconfig-config (2.11.0-6.7) ...
Setting up libnginx-mod-stream (1.10.3-1+deb9u5) ...
Setting up libnginx-mod-http-echo (1.10.3-1+deb9u5) ...
Setting up libfontconfig1:armhf (2.11.0-6.7) ...
Setting up libgd3:armhf (2.2.4-2+deb9u5) ...
Setting up libnginx-mod-http-image-filter (1.10.3-1+deb9u5) ...
Setting up nginx-full (1.10.3-1+deb9u5) ...
Setting up nginx (1.10.3-1+deb9u5) ...
Processing triggers for libc-bin (2.24-11+deb9u4) ...
root@raspberrypi:/home/pi# rm -f /etc/nginx/sites-enabled/default
root@raspberrypi:/home/pi# apt-get install evok
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  busybox dkms libavahi-client3 libow-3.1-5 libpython2.7 owfs-common python-ow
  raspberrypi-kernel-headers unipi-common unipi-firmware unipi-firmware-tools
  unipi-kernel-modules-dkms unipi-modbus-tools
Suggested packages:
  python3-apport menu
The following NEW packages will be installed:
  busybox dkms evok libavahi-client3 libow-3.1-5 libpython2.7 owfs-common
  python-ow raspberrypi-kernel-headers unipi-common unipi-firmware
  unipi-firmware-tools unipi-kernel-modules-dkms unipi-modbus-tools
0 upgraded, 14 newly installed, 0 to remove and 0 not upgraded.
Need to get 24.8 MB of archives.
After this operation, 143 MB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://archive.raspberrypi.org/debian stretch/main armhf raspberrypi-kernel-headers armhf 1.20190819~stretch-1 [16.7 MB]
Get:2 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libavahi-client3 armhf 0.6.32-2 [51.3 kB]
Get:3 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf owfs-common all 3.1p5-1 [16.2 kB]
Get:4 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libow-3.1-5 armhf 3.1p5-1 [265 kB]
Get:5 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf libpython2.7 armhf 2.7.13-2+deb9u4 [914 kB]
Get:6 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf python-ow armhf 3.1p5-1 [32.2 kB]
Get:7 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf busybox armhf 1:1.22.0-19 [374 kB]
Get:8 http://mirrors.dotsrc.org/raspbian/raspbian stretch/main armhf dkms all 2.3-2 [74.8 kB]
Get:9 https://repo.unipi.technology/debian stretch/main armhf unipi-common armhf 1.2.28~stretch [19.8 kB]
Get:10 https://repo.unipi.technology/debian stretch/main armhf evok armhf 2.3.6~stretch [6,158 kB]
Get:11 https://repo.unipi.technology/debian stretch/main armhf unipi-firmware-tools armhf 1.2.28~stretch [34.8 kB]
Get:12 https://repo.unipi.technology/debian stretch/main armhf unipi-firmware all 5.50 [156 kB]
Get:13 https://repo.unipi.technology/debian stretch/main armhf unipi-kernel-modules-dkms all 1.56 [53.5 kB]
Get:14 https://repo.unipi.technology/debian stretch/main armhf unipi-modbus-tools armhf 1.2.28~stretch [29.9 kB]
Fetched 24.8 MB in 5s (4,746 kB/s)                                             
Preconfiguring packages ...
configure
Nginx has been already installed
grep: /etc/nginx/sites-enabled/*: No such file or directory
dpkg-query: no packages found matching unipi-firmware
unipi-firmware failed to preconfigure, with exit status 1
Selecting previously unselected package libavahi-client3:armhf.
(Reading database ... 35129 files and directories currently installed.)
Preparing to unpack .../0-libavahi-client3_0.6.32-2_armhf.deb ...
Unpacking libavahi-client3:armhf (0.6.32-2) ...
Selecting previously unselected package owfs-common.
Preparing to unpack .../1-owfs-common_3.1p5-1_all.deb ...
Unpacking owfs-common (3.1p5-1) ...
Selecting previously unselected package libow-3.1-5:armhf.
Preparing to unpack .../2-libow-3.1-5_3.1p5-1_armhf.deb ...
Unpacking libow-3.1-5:armhf (3.1p5-1) ...
Selecting previously unselected package libpython2.7:armhf.
Preparing to unpack .../3-libpython2.7_2.7.13-2+deb9u4_armhf.deb ...
Unpacking libpython2.7:armhf (2.7.13-2+deb9u4) ...
Selecting previously unselected package python-ow.
Preparing to unpack .../4-python-ow_3.1p5-1_armhf.deb ...
Unpacking python-ow (3.1p5-1) ...
Selecting previously unselected package busybox.
Preparing to unpack .../5-busybox_1%3a1.22.0-19_armhf.deb ...
Unpacking busybox (1:1.22.0-19) ...
Selecting previously unselected package unipi-common.
Preparing to unpack .../6-unipi-common_1.2.28~stretch_armhf.deb ...
Adding 'diversion of /boot/overlays/ds2482.dtbo to /usr/share/rpikernelhack/overlays/ds2482.dtbo by rpikernelhack'
Adding 'diversion of /boot/overlays/neuronee.dtbo to /usr/share/rpikernelhack/overlays/neuronee.dtbo by rpikernelhack'
Adding 'diversion of /boot/overlays/neuron-spi.dtbo to /usr/share/rpikernelhack/overlays/neuron-spi.dtbo by rpikernelhack'
Adding 'diversion of /boot/overlays/neuron-spi-new.dtbo to /usr/share/rpikernelhack/overlays/neuron-spi-new.dtbo by rpikernelhack'
Adding 'diversion of /boot/overlays/unipiee.dtbo to /usr/share/rpikernelhack/overlays/unipiee.dtbo by rpikernelhack'
Unpacking unipi-common (1.2.28~stretch) ...
Setting up libavahi-client3:armhf (0.6.32-2) ...
Setting up owfs-common (3.1p5-1) ...

Creating config file /etc/owfs.conf with new version
Setting up libow-3.1-5:armhf (3.1p5-1) ...
Setting up libpython2.7:armhf (2.7.13-2+deb9u4) ...
Setting up python-ow (3.1p5-1) ...
Selecting previously unselected package evok.
(Reading database ... 35252 files and directories currently installed.)
Preparing to unpack .../evok_2.3.6~stretch_armhf.deb ...
configure
Nginx has been already installed
grep: /etc/nginx/sites-enabled/*: No such file or directory
Pre-script was invoked
Unpacking evok (2.3.6~stretch) ...
Setting up busybox (1:1.22.0-19) ...
Setting up unipi-common (1.2.28~stretch) ...
Removing 'diversion of /boot/overlays/ds2482.dtbo to /usr/share/rpikernelhack/overlays/ds2482.dtbo by rpikernelhack'
Removing 'diversion of /boot/overlays/neuronee.dtbo to /usr/share/rpikernelhack/overlays/neuronee.dtbo by rpikernelhack'
Removing 'diversion of /boot/overlays/neuron-spi-new.dtbo to /usr/share/rpikernelhack/overlays/neuron-spi-new.dtbo by rpikernelhack'
Removing 'diversion of /boot/overlays/neuron-spi.dtbo to /usr/share/rpikernelhack/overlays/neuron-spi.dtbo by rpikernelhack'
Removing 'diversion of /boot/overlays/unipiee.dtbo to /usr/share/rpikernelhack/overlays/unipiee.dtbo by rpikernelhack'
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.19.66+ /boot/kernel.img
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.19.66+ /boot/kernel.img
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-4.19.66+
run-parts: executing /etc/kernel/postinst.d/initrd-config 4.19.66+ /boot/kernel.img
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.19.66-v7+ /boot/kernel7.img
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.19.66-v7+ /boot/kernel7.img
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-4.19.66-v7+
run-parts: executing /etc/kernel/postinst.d/initrd-config 4.19.66-v7+ /boot/kernel7.img
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.19.66-v7l+ /boot/kernel7l.img
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.19.66-v7l+ /boot/kernel7l.img
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-4.19.66-v7l+
WARNING: missing /lib/modules/4.19.66-v7l+
Ensure all necessary drivers are built into the linux image!
depmod: ERROR: could not open directory /lib/modules/4.19.66-v7l+: No such file or directory
depmod: FATAL: could not search modules: No such file or directory
depmod: WARNING: could not open /var/tmp/mkinitramfs_d21C02/lib/modules/4.19.66-v7l+/modules.order: No such file or directory
depmod: WARNING: could not open /var/tmp/mkinitramfs_d21C02/lib/modules/4.19.66-v7l+/modules.builtin: No such file or directory
run-parts: executing /etc/kernel/postinst.d/initrd-config 4.19.66-v7l+ /boot/kernel7l.img
Created symlink /etc/systemd/system/unipi-ttys0-rs485.target.wants/unipi-ttys0-rs485.service → /lib/systemd/system/unipi-ttys0-rs485.service.
Created symlink /etc/systemd/system/sysinit.target.wants/unipicheck.service → /lib/systemd/system/unipicheck.service.
Created symlink /etc/systemd/system/unipigprs.target.wants/unipigprs.service → /lib/systemd/system/unipigprs.service.
Created symlink /etc/systemd/system/sysinit.target.wants/unipihostname.service → /lib/systemd/system/unipihostname.service.
Created symlink /etc/systemd/system/unipiiqrf.target.wants/unipiiqrf.service → /lib/systemd/system/unipiiqrf.service.
Created symlink /etc/systemd/system/unipinb.target.wants/unipinb.service → /lib/systemd/system/unipinb.service.
Selecting previously unselected package unipi-firmware-tools.
(Reading database ... 37383 files and directories currently installed.)
Preparing to unpack .../unipi-firmware-tools_1.2.28~stretch_armhf.deb ...
Unpacking unipi-firmware-tools (1.2.28~stretch) ...
Selecting previously unselected package unipi-firmware.
Preparing to unpack .../unipi-firmware_5.50_all.deb ...
Unpacking unipi-firmware (5.50) ...
Selecting previously unselected package raspberrypi-kernel-headers.
Preparing to unpack .../raspberrypi-kernel-headers_1.20190819~stretch-1_armhf.deb ...
Unpacking raspberrypi-kernel-headers (1.20190819~stretch-1) ...
Selecting previously unselected package dkms.
Preparing to unpack .../archives/dkms_2.3-2_all.deb ...
Unpacking dkms (2.3-2) ...
Setting up raspberrypi-kernel-headers (1.20190819~stretch-1) ...
Selecting previously unselected package unipi-kernel-modules-dkms.
(Reading database ... 71086 files and directories currently installed.)
Preparing to unpack .../unipi-kernel-modules-dkms_1.56_all.deb ...
Unpacking unipi-kernel-modules-dkms (1.56) ...
Selecting previously unselected package unipi-modbus-tools.
Preparing to unpack .../unipi-modbus-tools_1.2.28~stretch_armhf.deb ...
Unpacking unipi-modbus-tools (1.2.28~stretch) ...
Setting up unipi-firmware-tools (1.2.28~stretch) ...
Created symlink /etc/systemd/system/unipispi.target.wants/unipifirmware.service → /lib/systemd/system/unipifirmware.service.
Setting up unipi-firmware (5.50) ...
Setting up dkms (2.3-2) ...
Processing triggers for libc-bin (2.24-11+deb9u4) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up evok (2.3.6~stretch) ...
Created symlink /etc/systemd/system/multi-user.target.wants/evok.service → /lib/systemd/system/evok.service.
Successfully updated /opt/evok/bin/python2
configure
Nginx has been already installed
Setting up unipi-kernel-modules-dkms (1.56) ...
Loading new unipi-1.56 DKMS files...
It is likely that 4.19.66-v7+ belongs to a chroot's host
Building for 4.19.66+ and 4.19.66-v7+
Building initial module for 4.19.66+
Done.

unipi:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/4.19.66+/extra/

rtc-unipi.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/4.19.66+/extra/

depmod....

Backing up initrd.img-4.19.66+ to /boot/initrd.img-4.19.66+.old-dkms
Making new initrd.img-4.19.66+
(If next boot fails, revert to initrd.img-4.19.66+.old-dkms image)
update-initramfs...(bad exit status: 1)

-------- Uninstall Beginning --------
Module:  unipi
Version: 1.56
Kernel:  4.19.66+ (armv7l)
-------------------------------------

Status: Before uninstall, this module version was ACTIVE on this kernel.

unipi.ko:
 - Uninstallation
   - Deleting from: /lib/modules/4.19.66+/extra/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.


rtc-unipi.ko:
 - Uninstallation
   - Deleting from: /lib/modules/4.19.66+/extra/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.

depmod...

Backing up initrd.img-4.19.66+ to /boot/initrd.img-4.19.66+.old-dkms
Making new initrd.img-4.19.66+
(If next boot fails, revert to initrd.img-4.19.66+.old-dkms image)
update-initramfs...(bad exit status: 1)
Warning: There was a problem remaking your initrd.  You must manually remake it
before booting into this kernel.

DKMS: uninstall completed.
Error! Problems with mkinitrd detected.  Automatically uninstalling this module.
DKMS: Install Failed (mkinitrd problems).  Module rolled back to built state.
dpkg: error processing package unipi-kernel-modules-dkms (--configure):
 subprocess installed post-installation script returned error exit status 7
dpkg: dependency problems prevent configuration of unipi-modbus-tools:
 unipi-modbus-tools depends on unipi-kernel-modules (>= 1.42) | unipi-kernel-modules-dkms (>= 1.42) | neuron-kernel (>= 1.42) | axon-kernel (>= 1.13.20180719); however:
  Package unipi-kernel-modules is not installed.
  Package unipi-kernel-modules-dkms is not configured yet.
  Package neuron-kernel is not installed.
  Package axon-kernel is not installed.

dpkg: error processing package unipi-modbus-tools (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 unipi-kernel-modules-dkms
 unipi-modbus-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)

mhoejgaard avatar Dec 23 '20 03:12 mhoejgaard

Hello, you can try beta evok.

kratochvil01 avatar Apr 09 '24 10:04 kratochvil01

Evok v3.0.1 is released.

kratochvil01 avatar Jun 20 '24 08:06 kratochvil01