SilentCryptoMiner
SilentCryptoMiner copied to clipboard
UnamSanctam
How do I know if the miner is working?
I have run it but it does nothing if you can tell me how to find out if it works thank you.
If you run the checker then it will say whether the miner running or not, https://github.com/UnamSanctam/SilentCryptoMiner/wiki#how-do-i-check-if-its-mining.
I plan to put it on other computers I'm just trying it on this old pc. but here the miner works or not ? https://gyazo.com/1622c046cb6075dfc66edb95b228cdfe
It's not running in that screenshot, make sure that you have started the miner. Also make sure that the settings are correct, there are some example settings here as well https://github.com/UnamSanctam/SilentCryptoMiner/wiki#example-settings.
tested with the lights settings but it still doesn't work i don't know what i'm doing wrong https://gyazo.com/1622c046cb6075dfc66edb95b228cdfe
That's the same gyazo as before, just load the "Lite" settings, build the miner and then run it, then after maybe 1 minute run the checker. If it works then change the wallet addresses to your own and then try building and running it again.
I put the wrong one, this is the one with the lites settings https://gyazo.com/3d142ba7a24243c1f78334e7fa6c576d
And are you sure that you have run the miner exe, ftn.exe? Did you change any of the settings?
And are you sure you started it? I haven't seen it fail to install before so I don't think that's it.
https://www.youtube.com/watch?v=HdQZjQp5W-Y I think I did everything right
Firstly the Ethermine port is wrong, SSL is enabled (stratums) so you should use port 5555 and not the non-SSL port 4444. And secondly you started the checker too quickly, there is a 15 second start delay as default (the "Build" tab) so when you started the checker it would still be sleeping. Run the checker now when it's gone a while.
Try opening the "Advanced Options" and enable "DEBUG", then try building one and running it.
Still doesn't work,I have activated the debug, is there anything else I can do? Is it possible that this is because of my computer?
Download Process Hacker, then open it and right-click the top columns (Name, PID, CPU, etc) and press "Choose columns...", then in the window that appears select "Start time" in the left box and press "Show >" and then press OK. After you've done that press the "Start time" column at the top so that it sorts after start time, then start the miner and check what it's doing (you can also record it).
You'll have to make the window a little bit wider, the "Start time" column is added to the right of the "Description" column.
Now that I've clicked on it, do I start the miner? https://gyazo.com/c6da74bc54e236d8f45407e617bef7f5
Yes, it will show what programs are started and as such we'll know what doesn't start.
updater.exe is your miner (injector), it was still waiting for 15 seconds ("Start Delay") when you ran the checker and ended the video.
Looks like it maybe couldn't inject the watchdog or miners, do you not get any error message boxes when you enable "DEBUG"? Do you happen to have a 32-bit operating system or something? The miner should only start on 64-bit operating system but I have to ask.
Should I remove "watchdog"? I didn't get an error message when I enabled "debug", and I have a 64-bit operating system.
You can try, then we'll know if it's the watchdog shellcode injection or the miner process hollowing that causes it. Of course it could also be something else but I think those are the most likely.
Looks like you might not be able to do perform the process hollowing either, I haven't really seen that before (and no one has ever reported that). Can you try building one with this custom builder https://anonfiles.com/11m5Ocp9yf/Silent_Crypto_Miner_Builder_zip with "DEBUG" enabled?