CURA 5.8.1 start printing before heating the nozzle

[WeiglN]

Cura Version

5.8.1

Operating System

Windows 10

Printer

Ultimaker Original +

Reproduction steps

I constructed a simple modell with Freecad and produced a .stl File. I transfered it to Cura 5.8.1 UMO_Vogelhaus-Revolution (Meshed).txt

Actual results

The Printer starts normal with heating the bed, but when the 70° was reached printing starts. In the G File the reason is obvious, the M 105 and M 109 is missing: ;Generated with Cura_SteamEngine 5.8.1 M140 S70 M105 M190 S70 M104 S230 M82 ;absolute extrusion mode I tried different an older Versions 5.7.0 and that works

Expected results

Expected that the nozzle is heated before start printing

Add your .zip and screenshots here ⬇️

[LilBub]

Yes, this one has bit a few of us. If you get the Machine Settings plug in, you can check if these things are ticked

[WeiglN]

same problem with Cura 5.9.0-beta ;TARGET_MACHINE.NAME:Ultimaker Original+ ;Generated with Cura_SteamEngine 5.9.0-beta.1 M140 S70 M105 M190 S70 M104 S230 M82 ;absolute extrusion mode G21 ;metric values

[WeiglN]

it is ok with 5.7.1 ;TARGET_MACHINE.NAME:Ultimaker Original+ ;Generated with Cura_SteamEngine 5.7.1 M140 S70 M105 M190 S70 M104 S230 M105 M109 S230 M82 ;absolute extrusion mode Is not ok with Cura 5.7.2 ;TARGET_MACHINE.NAME:Ultimaker Original+ ;Generated with Cura_SteamEngine 5.7.2 M140 S70 M105 M190 S70 M104 S230 M82 ;absolute extrusion mode