Monster Truck Bumps

[reure1]

Cura Version

5.7.0

Operating System

Windows 10

Printer

Ender-3 S1 Pro

Name abnormal settings

No response

Describe model location

It will slice if the track standing on end. Track goes up and down.

Describe your model

It sliced standing on end but needed a lot more supports so it would not fall down.

Add your .zip here ⬇️

Bumps Generic PLA lw 0.4mm lh 0.2mm if 20% ext1 200C bed 60C.zip

[GregValiant]

Thanks for the report. I could not get it to "not slice". No matter how I oriented it, it still sliced. If you can get it to fail again, use the "Help | Show Configuration Folder" command to locate the Cura.log file. Zip that file and post the zip folder here and someone from the Cura team will take a look.

I sliced it with both normal and tree supports. With tree supports it's a 6:50 print. I enabled "Remove all Holes" but that didn't work because of the center dip. Here I configured the supports as if they were infill. They won't need to be removed so the Roof Z distance is zero and the XY distance is zero.

[github-actions[bot]]

This issue has been automatically closed because there has been no response to our request for more information from the original author. With only the information that is currently in the issue, we don't have enough information to take action. Please reach out if you have or find the answers we need so that we can investigate further.