Cura
Cura copied to clipboard
Ultimaker
Slicing Failed
Cura Version
5.7.0
Operating System
Windows 11
Printer
Ender 3v2
Name abnormal settings
default profiles
Describe model location
center of the buildplate
Describe your model
no
Add your .zip here ⬇️
Thanks for the report. Try running Cura "As Administrator" and see if it makes a difference. The model is fine and it sliced for me. Let us know if "Run as Administrator" makes a difference. I'll mark this as a duplicate and the Cura team will take a look.
This is an 18 1/2 hour print with your settings. The model looks like it was designed to print without support. The infill at 7% and infill layer thickness at 0.4 would be plenty. That cuts it down to 11 hours and 33% less filament. Just sayin'.
nope is the same problem i have tried As Administrator also its not working
one more thing is. the model slices when its in small but in bigger size getting failed
Use the "Help | Show Configuration Folder" command. Zip the "Cura.log" file and post the zip folder here. Maybe it will give a clue.
Here is a code from the Cura Engine crash.
"Backend exited abnormally with return code 3221225477!"
Maybe @HellAholic has some news on this.
I took a look at the project file across 3 different systems (windows 10 - Intel | windows 11 - Intel | windows 10 - AMD)
it slices without issues on all of them so this makes it hard to track.
We have the sentry report system in place so the crash report has been logged there. Unfortunately purely based on the error code it is not possible to pin-point the exact issue. I have a few guesses but one of them is already out (running in administrator) the other was the gradual flow (which is not enabled in your project file so that is ruled out) and lastly windows firewall rules or antivirus software rules/blocks.
