Ultimaker
100% infill breaks bridging
Cura Version
5.6.0
Operating System
Windows 11
Printer
Custom
Reproduction steps
I changed infill to 100% where bridging happened
Actual results
The bridging went away and it only had regular infill
Expected results
The bridges stay where they are
Add your .zip and screenshots here ⬇️
99% infill:
100% infill:
101% infill:
Also, not directly related, but why are those bridge lines so thin? Thinner lines are even more difficult to bridge, can't they be regular width? Edit: Oh, figured it out "Bridge Wall Flow" for the green/orange, "Bridge Skin Flow" for the yellow, seems an interesting default choice.
The stl in case that helps, just a new wall for my carriage.
Thanks for the report.
Infill is treated differently when it is at 100% density since 100% plastic doesn't care what pattern is used. What you are seeing might be a side-effect of that. For now, I would suggest setting the Infill Density to 99.99% (if that's what you require).
The Cura team will take a look.
After discussion with the team, we believe we will not work on this anytime soon and will therefore defer this issue so we can focus on the most requested and needed features and bug fixes from our community, we hope you understand.
Once again, we appreciate the report and the detailed explanation.
Cheers!