Cura
Cura copied to clipboard
Ultimaker
3D printer / slicing GUI built on top of the Uranium framework
### Application Version 5.1.0 ### Platform Windows 10 ### Printer Custom ### Reproduction steps Set "Extra Skin Wall Count" to a value > 0 and set "Skin Overlap Percentage" to...
### Is your feature request related to a problem? When printing walls with more than one line the first line is printed, then the nozzle makes a 90° turn, travels...
### Application Version 5.1 ### Platform Windows 10 ### Printer Ender 6 ### Reproduction steps Added Calibration from extension, Acceleration Tower. Attempt to slice. ### Actual results Failure to Slice...
### Application Version 5.1.0 ### Platform Windows 10 ### Printer Custom ### Reproduction steps Have a model that reaches over its footprint in at least one direction. Place the model...
### Is your feature request related to a problem? Most infill patterns have crossing lines. These crossing lines, when printed at high speed, can create little bumps at every crossing....
### Is your feature request related to a problem? I'm currently optimizing a profile for speed and I noticed that bottom layers and generally layers on top of a flat...
### Application Version 5.1.0 ### Platform Windows 10 ### Printer Anycubic Mega X ### Reproduction steps Imported .stl file scaled the model tried to slice ### Actual results I receive...
### Is your feature request related to a problem? Yes, in that Coasting values are not automagically corrected when Layer Height changes. This can cause gaps or 'pile ups,' (under...
### Is your feature request related to a problem? Yes, because fan speed changes are not instantaneous. ### Describe the solution you'd like I'm experimenting with the Bridging settings. Fan...
### Application Version 5.1.0 ### Platform windows 10 ### Printer no printer ### Reproduction steps Windows Windows 10 or higher Visual Studio with MSVC 2019 or higher Python 3.6 or...
