Tygrys-1

There might be a problem - after assembling the TX after photos the radio now refuses to boot with the analyzer connected. When I detach the CLK wire, it boots...

You are right, that way it is working ok. I have tested channels, but without arming, and this has side effect of maybe reversing channels, so to return to the...

The receiver was turned on, then the transmitter was turned on, there was long "beep", or 2 quick beeps. [Startup with receiver on.zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/5041895/Startup.with.receiver.on.zip) THR up 100% - down to 0%....

Move the throttle form 0 to about 40% and then to 100%. Movement was not linear, as I had to hold the plane not to fly away ;-) [THR 0-100.zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/5041915/THR.0-100.zip)...

This is the 2 cycle stick move, but without the model turned on, and without the arming cycle (THR UP/DN) [Ail-Mid-Left-Mid-Right-Mid-x2a.zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/5041994/Ail-Mid-Left-Mid-Right-Mid-x2a.zip) This is the 2 cycle stick move, but without...

If I FOOBAR the plane, the radio is yours ;-)