Tygrys-1

I have tried V761 several times with different TX id's, with no luck on binding. So I think it might be a little different transmitter/receiver combo, mainly due to the...

> > Do you have the radio or only the receiver? I have them both, the receiver is glued in the plane, but it is the one you linked from...

[YouTube](https://www.youtube.com/watch?v=F7cvBxGriBY), look at 1:57 It seams that this is a new version of 765-2, the older one was shipped with the Volantex transmitter with channel reverse buttons on the front....

External URUAV TMX5 Lite on Taranis X9 Lite. I have Saleae 8 channel clone. I can do the picture. Will try tommorow.

Ok. I think I can, but never tried this so I'll need some guidance.

  

Will do. Should I set Analyzer to SPI or just take the raw dump?

I have no 10MS rate, so I've choosen 12MS. Here is the 10s dump of the start sequence of the transmitter. [12 MHz, 120 M Samples [1].zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/5034403/12.MHz.120.M.Samples.1.zip) I think, that...


So I can unsolder the analyzer? Was my dump readable? Can you suggest the right clock settings for the SPI analyzer? I think of triggering at falling edge, because otherwise...