Tygrys-1

Hi. You always sat TTGOv2, what is wrong with v1?

Thx

> > It is not as easy because more than one protocol can be enabled on a port (port sharing) but I guess once serial RX is enabled on a...

IMHO UARTS can do both input and output at the same time, but they share all the settings like the baud rate and parity ect. SPort telemetry uses different baud...

> SBus and SPort can definitely not be used on the same UART Yes, they cannot. [OT] There is a trick with the softserial and on Matek F405 there can...

> Ok but then it is not technically the same UART Internally not. But from the outside it looks like ;-)

On System-hardware page, set the Serial Port (TTL) to "Telem mirror" For hardware connection, connect the bottom port to the Bluetooth like HC 05 or HC 06, GND->GND, +5V->+5V, TX->RX...

You can use module bay, but there you will need the inverter. BTW - you do not need the radio RX-TX bluetooth connection on bottom port, as the communication is...

For module bay look at the [https://github.com/CrazyDude1994/android-taranis-smartport-telemetry](https://github.com/CrazyDude1994/android-taranis-smartport-telemetry), I am not using module bay. For bottom port just wire 3 wires (GND, +5V and TX on Radio side) as described above....

Hi Pascal. This is the [receiver](https://www.monkeyhobby.com/volantex-rc-ear403-5ch-receiver-with-gyro-for-rc-plane-76502-76801-76702-74701-74706-75706-75704/) And you can find the transmitter on the same page as EAT 403, the description is wrong, as it is a 5 channel transmitter....