Not compile more errors

[selevo]

in ArduinoDroid apk

AR488.ino: In function 'void setup()':
AR488.ino:383:13: error: 'flushPbuf' was not declared in this scope
AR488.ino: In function 'void loop()':
AR488.ino:568:24: error: 'execCmd' was not declared in this scope
AR488.ino:575:35: error: 'sendToInstrument' was not declared in this scope
AR488.ino:620:15: error: 'tonMode' was not declared in this scope
AR488.ino:622:15: error: 'lonMode' was not declared in this scope
AR488.ino:625:20: error: 'attnRequired' was not declared in this scope
AR488.ino:631:33: error: 'flushPbuf' was not declared in this scope
AR488.ino:659:48: error: 'serialIn_h' was not declared in this scope
AR488.ino: In function 'uint8_t serialIn_h()':
AR488.ino:702:46: error: 'parseInput' was not declared in this scope
AR488.ino: In function 'uint8_t parseInput(char)':
AR488.ino:746:20: error: 'addPbuf' was not declared in this scope
AR488.ino:752:23: error: 'flushPbuf' was not declared in this scope
AR488.ino:755:26: error: 'showPrompt' was not declared in this scope
AR488.ino:764:38: error: 'isCmd' was not declared in this scope
AR488.ino:768:27: error: 'flushPbuf' was not declared in this scope
AR488.ino:774:70: error: 'isIdnQuery' was not declared in this scope
AR488.ino:776:25: error: 'flushPbuf' was not declared in this scope
AR488.ino:793:20: error: 'addPbuf' was not declared in this scope
AR488.ino:805:18: error: 'addPbuf' was not declared in this scope
AR488.ino:817:19: error: 'isCmd' was not declared in this scope
AR488.ino:821:17: error: 'flushPbuf' was not declared in this scope
AR488.ino: At global scope:
AR488.ino:904:23: error: 'addr_h' was not declared in this scope
AR488.ino:905:40: error: 'aspoll_h' was not declared in this scope
AR488.ino:906:23: error: 'amode_h' was not declared in this scope
AR488.ino:907:40: error: 'clr_h' was not declared in this scope
AR488.ino:908:40: error: 'dcl_h' was not declared in this scope
AR488.ino:909:40: error: 'default_h' was not declared in this scope
AR488.ino:910:23: error: 'eoi_h' was not declared in this scope
AR488.ino:911:23: error: 'eor_h' was not declared in this scope
AR488.ino:912:23: error: 'eos_h' was not declared in this scope
AR488.ino:913:23: error: 'eot_char_h' was not declared in this scope
AR488.ino:914:23: error: 'eot_en_h' was not declared in this scope
AR488.ino:915:23: error: 'help_h' was not declared in this scope
AR488.ino:916:40: error: 'ifc_h' was not declared in this scope
AR488.ino:917:23: error: 'id_h' was not declared in this scope
AR488.ino:918:23: error: 'idn_h' was not declared in this scope
AR488.ino:919:23: error: 'llo_h' was not declared in this scope
AR488.ino:920:23: error: 'loc_h' was not declared in this scope
AR488.ino:921:23: error: 'lon_h' was not declared in this scope
AR488.ino:922:23: error: 'macro_h' was not declared in this scope
AR488.ino:923:40: error: 'sendmla_h' was not declared in this scope
AR488.ino:924:23: error: 'cmode_h' was not declared in this scope
AR488.ino:925:23: error: 'sendmsa_h' was not declared in this scope
AR488.ino:926:40: error: 'sendmta_h' was not declared in this scope
AR488.ino:927:40: error: 'ppoll_h' was not declared in this scope
AR488.ino:928:23: error: 'prom_h' was not declared in this scope
AR488.ino:929:23: error: 'read_h' was not declared in this scope
AR488.ino:930:23: error: 'rtmo_h' was not declared in this scope
AR488.ino:931:23: error: 'ren_h' was not declared in this scope
AR488.ino:932:23: error: 'repeat_h' was not declared in this scope
AR488.ino:933:40: error: 'rst_h' was not declared in this scope
AR488.ino:934:23: error: 'trg_h' was not declared in this scope
AR488.ino:935:40: error: 'save_h' was not declared in this scope
AR488.ino:936:23: error: 'setvstr_h' was not declared in this scope
AR488.ino:937:23: error: 'spoll_h' was not declared in this scope
AR488.ino:938:40: error: 'srq_h' was not declared in this scope
AR488.ino:939:23: error: 'srqa_h' was not declared in this scope
AR488.ino:940:23: error: 'stat_h' was not declared in this scope
AR488.ino:941:23: error: 'ton_h' was not declared in this scope
AR488.ino:942:40: error: 'unlisten_h' was not declared in this scope
AR488.ino:943:40: error: 'untalk_h' was not declared in this scope
AR488.ino:944:23: error: 'ver_h' was not declared in this scope
AR488.ino:945:40: error: 'verb_h' was not declared in this scope
AR488.ino:946:23: error: 'xdiag_h' was not declared in this scope
AR488.ino: In function 'void execCmd(char*, uint8_t)':
AR488.ino:1036:15: error: 'getCmd' was not declared in this scope
AR488.ino: In function 'void setvstr_h(char*)':
AR488.ino:1958:16: error: 'id_h' was not declared in this scope
AR488.ino: In function 'void attnRequired()':
AR488.ino:2450:21: error: 'device_listen_h' was not declared in this scope
AR488.ino:2457:23: error: 'device_unl_h' was not declared in this scope
AR488.ino:2462:23: error: 'device_unt_h' was not declared in this scope
AR488.ino:2521:26: error: 'execGpibCmd' was not declared in this scope
AR488.ino:2548:23: error: 'device_listen_h' was not declared in this scope
AR488.ino:2560:21: error: 'device_talk_h' was not declared in this scope
AR488.ino: In function 'void execGpibCmd(uint8_t)':
AR488.ino:2615:22: error: 'device_spe_h' was not declared in this scope
AR488.ino:2622:22: error: 'device_spd_h' was not declared in this scope
AR488.ino:2626:22: error: 'device_unl_h' was not declared in this scope
AR488.ino:2630:22: error: 'device_unt_h' was not declared in this scope
AR488.ino:2634:22: error: 'device_sdc_h' was not declared in this scope
Return code is not 0

[Twilight-Logic]

Could you please attach your AR488.ino and AR488_Config.h file please?

Usually when I have seen output like that it was because one of the source files has been corrupted. In this case, evidently AR488.ino. Did you make any changes in there for any reason? Configuration is generally done in AR488_Config.h.

[selevo]

all files origunal from this git not edit my be problem only with arduinodroud program In arduino ide online - normal build https://youtu.be/HCp-8tU8e9Y?feature=shared

[Twilight-Logic]

Thank you for confirming. Will look into it.

[Twilight-Logic]

Just to confirm, ArduinoDroid does not yet have full compatibility with all Arduino projects written in the Arduino IDE.