Townie-au

Is the bd sensor dead? Please help

Ok. Got it working somewhat by flashing the beta firmware. M102 s-1 returns nothing M102 s-6 calibrates successfully However when I go to home z I get "Bed Distance Sensor...

What about this Mark? However when I go to home z I get "Bed Distance Sensor data error:10.24"

> did you modify the cable before or just the software? Just the software.

> > you can test BDsensor with the gpio on the Pi. for example: [#111 (comment)](https://github.com/markniu/Bed_Distance_sensor/issues/111#issuecomment-2046685001) connect the bdsensor to the gpio on the PI like gpio17 and gpio27. >...

> how about use the gpio in the EXP1? E.g. PB6 PB7 Im going to try the RPI.

3.2 40 Pins GPIO When Manta series motherboard work with CB1, 40 pins GPIO is a custom IO arrangement, as shown in the figure below, Pin 7 is CB1's "PC7",...


OMG. Finally worked it out. GPIO78 and GPIO74 Same error on CB1 GPIO.

> > OMG. Finally worked it out. GPIO78 and GPIO74 Same error on CB1 GPIO. > > worked on RPI GPIO? No. Same error. No data or corrupt data from...