Brocade SAN Switches Error Counters

[Tontonitch]

From Carsten (http://www.tontonitch.com/phpbb/viewtopic.php?f=3&t=2327)

v 0.5 is great and works on all my devices. For the Brocade SAN switches i miss the rest of the errorcounters beside discard/errors packets. Would be nice to have them in the next version of check_interface_table.

Description: enc in = Number of encoding errors inside frames received (Rx) crc err = Number of frames with CRC errors received (Rx) too shrt = Number of frames shorter than minimum received (Rx). too long = Number of frames longer than maximum received (Rx). bad eof = Number of frames with bad end-of-frame delimiters received (Rx). enc out = Number of encoding error outside of frames received (Rx). disc c3 = Number of Class 3 frames discarded (Rx). This counter includes the sum of the following class 3 discard counters reported by the portStatsShow command: er_rx_c3_timeout, er_tx_c2_timeout, er_c2_dest_unreach, and er_other_disc.

OIDs: enc in ".1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21.<SNMP PORT NUMBER>" crc err ".1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22.<SNMP PORT NUMBER>" too short ".1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23.<SNMP PORT NUMBER>" too long ".1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24.<SNMP PORT NUMBER>" bad eof ".1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25.<SNMP PORT NUMBER>" enc out ".1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26.<SNMP PORT NUMBER>" disc c3 ".1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28.<SNMP PORT NUMBER>"