TheDK
TheDK
I just got around to it and submitted a PR for the German localization.
I went through that and did not find anything in the messages at the time with regard to what was detected. Since the change to MQTT that might have changed...
That was almost too easy - ESP32 NodeMCU DevKit C with a CN105 to Jumper Pigtail. Just connected, flashed and works instantly. No Level Shifter - I’ll report back should...
I agree that the PID controller is still running, but turning the thermostat off does not change the behaviour. I thought the Fan controller was added to manually control the...
That is understood. So my question remains: How to stop the PID controller? :) But it's not that important... ;)
That is understood, here is the behaviour I am seeing: 1. PID controller is running, all good. 2. I turn the thermostat to OFF as shown above 3. I activate...
...and to add another question: When I try the change the number entities (i.e. number.serverrack_fan_kd) nothing happens in the HA UI, nothing seems to happen at the ESP32 and when...
After going to .8 my admittedly too large DB (80 GB) not only failed the update without noticing (states table full), but also corrupted the DB because HA ran into...
> @TheDK based on other issues (like #124356 and others) there are at least two distinct problems: > > I hope that both can be fixed; hopefully the maintainers are...
Same here - cannot change resolver and lots of errors as the now Cisco-owned OpenDNS doesn't seem to resolve reliably anymore.