[Bug]: Issue with geometry

[rkaeplive]

What happened?

I have issues with geometry T-geometry is wrong rotated (1st picture- OpenIFCViewer, 2nd - ifcjs)

and some problems with back side

Version

"web-ifc-viewer": "^1.0.217"

What browsers are you seeing the problem on?

No response

Relevant log output

No response

Anything else?

No response

[rkaeplive]

geometry_issues.Ifc.zip

[QuimMoya]

I opened your model in IFC.JS

And then in Bimvision

While there may be an issue with the expansion of metallic profiles, I have been unable to locate the specific problem you mentioned earlier.

[QuimMoya]

Hi, good news, it seems last update solved some issues.

[rkaeplive]

@QuimMoya what version of ifcjs do you use? I use npm install. I can send you the repo of this issue

[rkaeplive]

@QuimMoya https://github.com/rkaeplive/geometry-issue-three in this case this T-geometry is rotated and some bugs with meshes

[QuimMoya]

@rkaeplive Ok i will look at this

[QuimMoya]

The problem with rotated T profiles will be solved in the next release 0.0.42 , this week we will do it. But the problem of missing faces is still present in some profiles, i will work on it.

[rkaeplive]

Hello, did you solve this?

[rkaeplive]

@QuimMoya hello?

[QuimMoya]

@rkaeplive

Hello

Sorry for the delay. Yes, the problem of rotated profiles is solved. Not sure if all problems with missing faces are solved.

[rkaeplive]

@QuimMoya did you release it ?

[rkaeplive]

Hello again, did you solve missing faces issue?

[QuimMoya]

@rkaeplive

Yes, the missing faces should be solved, and the rotated T. We will do a new release soon and many of these problems should became solved But if you find anything wrong please post the picture, it's easier for us to identify problems in the model using pictures

[rkaeplive]

@QuimMoya hello again Where are many missing faces here, im not use DoubleSide material backside is ok this file Clinic_A.ifc.zip