Teresa-AlliedVision

The 1500 C models do not include GenICam over CSI support. Depending on the model, driver and Vimba version you can open the camera in Vimba Viewer and modify the...

Hi, can you give an example of your code and/or check that the applicable commands are within the `with Vimba.get_instance():` statement? Cheers, Teresa

Hello, I checked with the developer: It is not possible. The GVSP discovery packets are necessary for finding the camera(s).

Hi, thanks for making us aware again, we did check more thoroughly and determined the behaviour to be a bug. You can enter the following lines into the source code...

Hi, I assume you're using Vimba6 and have already modified the source code of vimba.py to work around the network discovery bug? Try the following minimal example, if it doesn't...

Hello, we found the issue and the workaround Niklas and I decided on is the following: When you discover the camera with an ID, then that ID (which will be...

The camera and adapter/host need to be in the same subnet. Please refer to the "User Guide" for the specific settings the camera and host should have. Depending on the...

Can you stream all 3 cameras with the same settings in Vimba Viewer? If not, then this might be a bandwidth problem. To look into it further yu would need...

Hi, pleasse check first of all, if all of the cameras can be accessed and stream in Vimba Viewer at the same time. This is to make sure that there...

Hi, can you provide us with the environmental variables of your system (if they include Vimba) and how you installed Vimba/what instructions you followed? Ubuntu 20.04 is a tested operating...