Tamzeed

N-Tx Changing in CSI matrix

3

I have my NIC card attached computer as an AP. I ping it from another device which has 2X2 MIMO. However, the csi matrix is not consistently 2X3X30. Rather it...

N-TX changing

2

I have my NIC card attached computer as an AP. I ping it from pixel2 which has 2X2 MIMO. However, the csi matrix is not consistently 2X3X30. Rather it varies...

Phase Shifting for Consecutive Packets

1

Hi, I am using my NIC card connected PC as an AP. It is operating at 2.4 GHz. I am pinging it from a mobile in a fixed location. When...

Hi, I was trying to configure my NIC 5300 connected PC as an AP operating at 5GHz. However, I am getting the following error: "**channel 40 disabled for use in...

The default injection mode generates random packets with the mac address 00:16:ea:12:34:56. Is there any way to change this address? Or is there any way to get CSI for packets...

Not Understanding Hard Coded Value in Matlab Script

1

Hi, I see in the read_bf_file.m there is a hard coded value of 187 to check `if (code == 187)`. The associated comment with that is "If unhandled code, skip...