Taglio81

hello, congratulations for the work done, I'm passionate about this library, but unfortunately the lack of programming knowledge block me .. I would like to make a display (probably with...

hello Timo, I'm doing some tests on the bench, unfortunately the connectors for my existing n2k network and the controller SN65HVD230, MCP2551 and TJA1050, I have yet to get. I...

hello everyone, the 3.5 "nextion display is continuing, with ESP32, a second hardware serial (so I keep the usb on board for debugging) and a shift level, I send the...

It is correct, the project provides only the reading of data. The example I used as a start is DataDisplay2.ino, but the SetMode is not included in the setup, so...

in my project, I started with MCP2551 the first transmitters arrived, with logic level converter 5v-3,3 fors esp32, and the system worked immediately. In the meantime, they arrived also SN65HVD230...

Hi Menier, I don't know if it can help you, but in my notes I found that using ESP32 Dev kit the pins used are: - GPIO16 -> CAN TX...