TMRh20

Per the datasheet: Receiver X Fast AGC for improved dynamic range X Integrated channel filters X 13.5mA at 2Mbps X -82dBm sensitivity at 2Mbps X -85dBm sensitivity at 1Mbps X...

Ok let us know when it’s ready for review. > On Aug 31, 2021, at 5:27 AM, Ritvi Mishra ***@***.***> wrote: > >  > Creating a first pull request....

Yeah this issue has come up more and more often. I even made a blog post about it: https://tmrh20.blogspot.com/2020/09/transferring-data-between-systems-using.html?m=1 I agree it should be in common issues but not sure...

Possibly, I would have to look into the specific differences, but if somebody already has an idea what they are, that would help a lot. In RF24Network_Dev, there is a...

Not sure about this one. https://docs.huihoo.com/doxygen/linux/kernel/3.7/structspi__transfer.html > All SPI transfers start with the relevant chipselect active. Normally it stays selected until after the last transfer in a message. Drivers can...

Just to be clear, I should node that cs_change 1 does not work on RPi. I don't have a scope to see exactly what is going on.

Are you familiar with https://github.com/floe/BTLE ? The code looks pretty similar to the link you posted, but most of the hard stuff is done in the library, so the user...

That sounds reasonable, show how to configure the radio and do it manually while linking the BTLE lib. I was intending to get into the existing examples recently for some...

Nice work! It looks like you have all the bases covered so I’m good with these changes. I thought it was a bit too granular at first, but on further...

FYI just wanted to say thanks for this and that I've been meaning to look closer at this and will test it out soon.