SD Card Read error while using TMRpcm

[kausikp11]

I am working on a project where after recording the sound it needs to send the .wav file to local server. I tried working on sending the file seperately first which was working without issue.

When I tried integrating it with the TMRpcm it is showing as file not available. So when I checked it by unincluding the TMRpcm and its components, it works great.

Can you help me sort this as I need to record the sound and also send the file to server. The components I have are

1. Arduino Nano.
2. Sound Sensor.
3. ESP-01 (Wifi module).

This is the code I am using

#include <TMRpcm.h>
#include "WiFiEsp.h"
#include <SD.h>
// Emulate EspSerial on pins 2/3 if not present
#ifndef HAVE_HWEspSerial
#include "SoftwareSerial.h"
SoftwareSerial EspSerial(7, 8); // RX, TX
#endif
//WiFiEspClient client;
WiFiEspClient client;
TMRpcm audio;
int file_number = 0;
static int len = 0;
#define CLIENT_BUFFER_SIZE 64 // Adjust this buffer size according to your needs

int buttonState = 0;
//1float flow; //Liters of passing water volume
//1unsigned long pulse_freq;

#define SD_CSPin 4
// delay function for with serial log.


void wait_min() {
  int count = 0;
  int secs = 5;
  while (1) {
    //Serial.print('.');
    delay(1000);
    count++;
    if (count == secs) {
      count = 0;
      break;
    }
  }
  //Serial.println();
  return ;
}
void setup() {
    // initialize serial for debugging
    SD.begin(SD_CSPin);
  Serial.begin(9600);
  //Sets up the pins
  pinMode(A0, INPUT);
  pinMode(3, OUTPUT);
  pinMode(6, INPUT_PULLUP);
//1  pinMode(2, INPUT);
//1  attachInterrupt(0, pulse, RISING); // Setup Interrupt

//  //Serial.println(F("loading... SD card"));
//  if (!SD.begin(SD_CSPin)) {
//    //Serial.println(F("An Error has occurred while mounting SD"));
//  }
//  else {
//    //Serial.println(F("SD card loaded"));
//  }
//  while (!SD.begin(SD_CSPin)) {
//    //Serial.print(F("."));
//    delay(500);
//  }
  
  // initialize serial for ESP module
  EspSerial.begin(9600);
  // initialize ESP module
  WiFi.init(&EspSerial);
  int status = WL_IDLE_STATUS;     // the Wifi radio's status

//  // attempt to connect to WiFi network
  while ( status != WL_CONNECTED) {
    // Connect to WPA/WPA2 network
    status = WiFi.begin("ACT103700825351", "25851250");
  }
  audio.CSPin = SD_CSPin;
}
void loop() {
  
  buttonState = digitalRead(6);
  char fileSlNum[3] = "";
    itoa(file_number, fileSlNum, 10);
    char file_name[10] = "";
    strcat(file_name, "spy");
    strcat(file_name, fileSlNum);
    strcat(file_name, ".wav");
  if (buttonState == LOW) {
//1    pulse_freq = 0;
//1    char dataString[20] = "";
    Serial.println("In loop");
    char fileSlNum[3] = "";
    itoa(file_number, fileSlNum, 10);
    char file_name[10] = "";
    strcat(file_name, "spy");
    strcat(file_name, fileSlNum);
    strcat(file_name, ".wav");
    //Serial.print("New File Name: ");
    //Serial.println(file_name);
    digitalWrite(3, HIGH);
    audio.startRecording(file_name, 84000, A0);
    //Serial.println("startRecording ");
    // record audio for 2mins. means , in this loop process record 2mins of audio.
    // if you need more time duration recording audio then
    // pass higher value into the wait_min(int mins) function.
    wait_min();
    audio.stopRecording(file_name);
    delay(1000);
    Serial.println("Out");
//1    flow = .00225 * pulse_freq;
    //Serial.println("stopRecording");
//1    Serial.println(flow);
//1    File dataFile = SD.open("dataset.csv", FILE_WRITE);
//1    strcat(dataString, file_name);
//1    strcat(dataString, ",");
//1    String data = dataString + String(flow);
//1    // if the file is available, write to it:
//1    if (dataFile) {
//1      dataFile.println(data);
//1      dataFile.close();
//1      // print to the serial port too:
//1      //Serial.println(dataString);
//1    }
//1    // if the file isn't open, pop up an error:
//1    else {
//1      //Serial.println("error opening datalog.txt");
//1    }
//1    pulse_freq = 0;
  //}
//  if (client.connect("192.168.0.104", 8000)) {
//    //Serial.println(F("Start uploading..."));
//  String start_request = "";
//  String end_request = "";
//  String filename="spy0.wav";
//  
//  start_request = start_request + "\n" + "------WebKitFormBoundaryuPbojkvQ2buPPB8a" + "\n" + "Content-Disposition: form-data; name=\"myfile\";filename="+filename+"\n" + "Content-Type: audio/wav" + "\n" + "\n";
//  end_request = end_request + "\n" + "-------WebKitFormBoundaryuPbojkvQ2buPPB8a--" + "\n";
//  len=len+start_request.length();
//  len=len+end_request.length();
//  client.println(F("POST /home HTTP/1.1"));
//  client.println(F("Host: 192.168.0.104"));
//  client.println(F("Content-Type: form-data; boundary=----WebKitFormBoundaryuPbojkvQ2buPPB8a"));
//  client.print(F("Content-Length: "));
//  client.println(String(len));
//  client.print(start_request);
//
//  File audio_file = SD.open("spy0.wav");
//  if(audio_file){
//    byte clientBuf[64];
//    int clientCount =0;
//    while(audio_file.available()){
//      clientBuf[clientCount] = audio_file.read();
//      clientCount++;
//      if(clientCount>63){
//        client.write(clientBuf,64);
//        clientCount=0;
//      }
//      if(clientCount>0) client.write(clientBuf,clientCount);
//      audio_file.close();
//    }
//    delay(1);
//    client.println(end_request);
//    client.stop();
//  }
//  
//  //Serial.println(end_request);
// }
sendFileToServer(file_name);
    digitalWrite(3, LOW);
    file_number++;
}
sendFileToServer("SPY0.WAV");
delay(30000);
file_number++;
}
void sendFileToServer(const char* fileName) {
  Serial.println(fileName);
//  String file;
//  file+=String(fileName);
//  Serial.println("In func");
//  Serial.println(file);
//  file.toUpperCase();
//  Serial.println(file);
  File audioFile = SD.open(fileName);
  if (!audioFile) {
    Serial.println("Error opening file");
    return;
  }

  // Connect to the server
  if (client.connect("192.168.0.104", 8000)) {
    Serial.println("Connected to server");

    // Send HTTP headers
    client.println(F("POST /simple_upload/ HTTP/1.1"));
    client.print(F("Host: "));
    client.println("192.168.0.104:8000");
    client.println(F("Connection: close"));
    client.println(F("Content-Type: multipart/form-data; boundary=----WebKitFormBoundary7MA4YWxkTrZu0gW"));
    client.print(F("Content-Disposition: form-data; name=\"myfile\"; filename=\""));
    client.print(fileName);
    client.println(F("\""));
    client.println(F("Content-Type: audio/wav")); // Set content type to audio/mpeg
    client.println(F("Content-Transfer-Encoding: binary"));
    client.print(F("Content-Length: "));
    client.println(audioFile.size());
    client.println();

//    Serial.println(F("POST /simple_upload/ HTTP/1.1"));
//    Serial.print(F("Host: "));
//    Serial.println("192.168.0.104");
//    //Serial.println(F("Connection: close"));
//    
//    Serial.print(F("Content-Disposition: form-data; name=\"myfile\"; filename=\""));
//    Serial.print(fileName);
//    Serial.println(F("\""));
//    Serial.println(F("Content-Type: audio/wav")); // Set content type to audio/mpeg
//    Serial.println(F("Content-Transfer-Encoding: binary"));
//    Serial.print(F("Content-Length: "));
//    Serial.println(audioFile.size());
//    Serial.println();
//    Serial.println(F("This is sending"));
//    Serial.println(audioFile.size());

    // Send the file content
    uint8_t buf[CLIENT_BUFFER_SIZE]; // Buffer to read from SD card
    size_t bytesRead;

    // Send the file content
    while ((bytesRead = audioFile.read(buf, sizeof(buf))) > 0) {
      client.write(buf, bytesRead);
    }

    // End of the request
    client.println();
    client.println(F("------WebKitFormBoundary7MA4YWxkTrZu0gW--"));

    audioFile.close();
    //Serial.println(F("File sent"));
  } else {
    Serial.println(F("Connection failed"));
    audioFile.close();
  }
}


//1void pulse () // Interrupt function
//1{
//1  pulse_freq++;
//1}