Tadeu Bento
Tadeu Bento
@lanwin , side note, are you planning on exposing the inverter data? It would be nice to have it in HA!
> The Power-Value seems not to be extremely accurate, but it should be nice to log the consumed Power in home automation. This was what I wanted to read from...
> There are a bunch of more nice values like the outdoor temperature, temperatures of the condenser unit, the fan-status, the valves or the EEVs but i don't know how...
> wind_direction:31 and no changes to that value, even when I press direction from remote. Are you sure you're looking at the `src:` of the correct split? Note that all...
> > In my system (looking at the right `src`) when the blades aren't moving I get `wind_direction:31`. After pressing the remote button blades start moving up and down and...
Is this really completed? @omerfaruk-aran
@omerfaruk-aran this isn't fixed. Please re-open this issue. There's important information attached related to the commands and logs.
> ist there something else on the bus than 2 indoor and 1 outdoor units? No. I assume `CC` is the outdoor unit... but I might be wrong as the...
> there is a fourth device on the bus I only have the outdoor unit and two indoor units. And yes, I oversaw the installation of the units. What about...
> I think there is some other device in the outdoor unit, c8 is the mainboard and cc some additional thing connected to the mainboard by the bus. That would...