BizHawk
BizHawk copied to clipboard
TASEmulators
NESHawk lacks sliders for special sound channels
Under Sound Channels is a slider for a setting called "APU Channels". This affects the overall volume of all five standard channels of the NES APU. However, it does not affect the volume of extra channels added by special mappers such as the VRC7, which can be best seen with Lagrange Point. It would be nice if there are extra sliders for these special channels, one for each mapper like with Mesen.
An acceptable option would also be for the same single slider to just affect all channels at once.
I agree with feos. By the way, I compared Akumajou Densetsu (VRC6)'s real hardware audio with the emulator and the special channels also sound too quiet in the latter, which isn't accurate at all.
By the way, I compared Akumajou Densetsu (VRC6)'s real hardware audio with the emulator and the special channels also sound too quiet in the latter, which isn't accurate at all.
You have the actual device? Or was it from some video? We searched and found only these. In the CV3 description the author says it was meant for old famicoms which had quieter external audio and sounds good that way, while Gimmick was meant for newer famicoms like AV which has louder external audio and sounds better that way.
You have the actual device? Or was it from some video?
Yes, I do have a Sharp Twin Famicom. Here's how the game's opening sounds like on real hardware:
https://user-images.githubusercontent.com/24638400/178121052-530d0512-9bf5-44ac-b87f-02076d6a1b24.mp4
(Sorry about the bad quality, I have no means of recording the audio internally so just used my phone.)
And here is how it sounds in bizhawk:
https://user-images.githubusercontent.com/24638400/178120913-a40d917f-51f0-4faa-be8b-f0847c04bcd3.mp4
Note how the special channels are too quiet and almost can't be heard over the standard channels. (Setting the APU volume to 10 makes it sound pretty much like the real machine, though.)
I...think you got the special channels and the standard channels mixed up. At the default APU volume (1), the standard channels are way too quiet, drowned by the VRC6 audio. However...at APU volume 10, I found that the VRC6 audio gets a bit drowned by the standard channels. Setting it to 5 is very close, if not on par to how it sounds like in this video.
Yeah, I wasn't completely sure on that regard to be honest. :P A midpoint between the two sounds like the right thing to do.