TA2k
[Bug] Refresh of consumption not updated regularly
Vitodens 200W here. Adapter shows no warnings or errors. Consumption of Gas (m3) and Power (KWh) only updated by Adapter every once in a while, while Viessmann App shows nearly realtime-data.
If I restart the Adapter it refreshes instantly. An option for „How often to refresh from the Viessmann device“ would be helpful.
Update device status in minutes in the settings
to see details enable debug log
Wouldn't lowering "Update Gateway events in minutes" from 300 to around 15 solve the issue?
Is there an update here? I still have no daily updates on consumption. Viessmann App says 1,5 cubicmeters usage today, API says 0.
@TA2k the "Update device status" is set to 5 minutes, I think thats the default of the adapter.
What I've found out so far:
- Viessmann App always shows realtime usage
- API doesn't get realtime data
- Restarting the adapter doesn't help, it only gets the consuption up to the day before (yesterday)
- Only way to trigger immediate refresh of the API: Restart WiFi module of the Viessmann Vitodens 200W via App and then restart the adapter. Then the consumption is shown several seconds later.
But I have to do this every day again. And it only works once. As soon as the data is fetched, it stays at that value. Until I start the above procedure again or the next day begins and it is set to "0".
I thinks this is a topic for https://www.viessmann-community.com/t5/The-Viessmann-API/bd-p/dev-viessmann-api
I thinks this is a topic for https://www.viessmann-community.com/t5/The-Viessmann-API/bd-p/dev-viessmann-api
Done: https://community.viessmann.de/t5/The-Viessmann-API/API-liefert-keine-Echtzeit-Verbrauchsdaten-von-Vitodens-200W/m-p/567397#M2959