Adding fan speed error

[RikBast]

Using the SwiCago/HeatPump Arduino libary to talk to the unit directly via the internal CN105 connector. All works, just adding the fan speed seems a problem.

I am trying to write software to esp32 board with adding fan speed. I get this error all the time:

Leaving... Hard resetting via RTS pin... INFO Successfully uploaded program. INFO Starting log output from /dev/cu.usbserial-02M3J84W with baud rate 115200 [19:29:41][I][logger:351]: Log initialized [19:29:41][C][ota:473]: There have been 0 suspected unsuccessful boot attempts. [19:29:41][D][esp32.preferences:114]: Saving 1 preferences to flash... [19:29:41][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed [19:29:41][D][MitsubishiHeatPump:620]: Ping request received [19:29:41][I][app:029]: Running through setup()... [19:29:41][D][template.select:014]: Setting up Template Select [19:29:41][D][template.select:017]: State from initial: Auto [19:29:41][D][select:015]: 'Fan mode': Sending state Auto (index 0) [19:29:41][D][climate:011]: 'mideahvac' - Setting [19:29:41][D][climate:024]: Fan: AUTO [19:29:41]Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled. [19:29:41] [19:29:41]Core 1 register dump: [19:29:41]PC : 0x400f0835 PS : 0x00060e30 A0 : 0x800f08b9 A1 : 0x3ffb2220 WARNING Decoded 0x400f0835: HeatPump::lookupByteMapIndex(char const**, int, char const*) at /Users/rikbastiaens/Documents/ESPHome/.esphome/build/mitsubishi-slaapkamer/.piolibdeps/mitsubishi-slaapkamer/HeatPump/src/HeatPump.cpp:455 [19:29:41]A2 : 0x00000000 A3 : 0x9f31c0cd A4 : 0x00000006 A5 : 0x3f408a76 [19:29:41]A6 : 0x00000000 A7 : 0x00000000 A8 : 0x9f31c0cd A9 : 0x3ffb21a0 [19:29:41]A10 : 0x0003ad10 A11 : 0x00000028 A12 : 0x0000006d A13 : 0x00000028 [19:29:41]A14 : 0x3f4035ca A15 : 0x00000010 SAR : 0x00000004 EXCCAUSE: 0x0000001c [19:29:41]EXCVADDR: 0x9f31c0cd LBEG : 0x40089965 LEND : 0x40089975 LCOUNT : 0xfffffff5 [19:29:41] [19:29:41] [19:29:41]Backtrace:0x400f0832:0x3ffb22200x400f08b6:0x3ffb2240 0x400dc681:0x3ffb2260 0x400dc76c:0x3ffb2280 0x400d9e51:0x3ffb22a0 0x400e7e0b:0x3ffb22c0 0x400e7984:0x3ffb2380 0x400e7889:0x3ffb23c0 0x400e7830:0x3ffb2420 0x400de6bc:0x3ffb24b0 0x400df571:0x3ffb2530 0x400df5b6:0x3ffb2590 0x400e63c4:0x3ffb25b0 0x4017019d:0x3ffb25d0 0x400e5fe4:0x3ffb25f0 0x400e8a7a:0x3ffb2620 0x400f3ada:0x3ffb2820

---

I use a yaml file, but I don't know if that is causing the issue. See below:

substitutions: node_name: mitsubishi_slaapkamer # Use a unique name. node_id: mitsubishi_slaapkamer_ac # Use a unique id. friendly_node_name: "Split Mitsubishi"

sensor:

• platform: template name: ${friendly_node_name} fan mode id: ${node_id}_fan_mode internal: true update_interval: 10s lambda: !lambda |- if (id(${node_id}_my_climate).fan_mode == 2) { if (id(${node_id}_select_fan_mode).state != "Auto") { auto call = id(${node_id}_select_fan_mode).make_call(); call.set_option("Auto"); call.perform(); } } else if (id(${node_id}_my_climate).fan_mode == 3) { if (id(${node_id}_select_fan_mode).state != "Low") { auto call = id(${node_id}_select_fan_mode).make_call(); call.set_option("Low"); call.perform(); } } else if (id(${node_id}_my_climate).fan_mode == 4) { if (id(${node_id}_select_fan_mode).state != "Medium") { auto call = id(${node_id}_select_fan_mode).make_call(); call.set_option("Medium"); call.perform(); } } else if (id(${node_id}_my_climate).fan_mode == 5) { if (id(${node_id}_select_fan_mode).state != "High") { auto call = id(${node_id}_select_fan_mode).make_call(); call.set_option("High"); call.perform(); } } return id(${node_id}_my_climate).fan_mode;

Select

select:

• platform: template name: "Fan mode" id: ${node_id}_select_fan_mode icon: mdi:fan optimistic: true options:
  • Auto
  • Low
  • Medium
  • High on_value: then:
    • lambda: |- auto call = id(${node_id}_my_climate).make_call(); call.set_fan_mode(x.c_str()); call.perform();

esphome: name: ${node_name} friendly_name: ${friendly_node_name}

Set platform options to use c++ 17 instead of 11

platformio_options: build_unflags: - "-std=gnu++11" build_flags: - "-std=gnu++17"

esp32: board: wemos_d1_mini32 framework: type: arduino

Enable logging

logger: # Component esphome.coroutine took a long time for an operation logs: component: ERROR

Native API and remote logging

api: services: - service: set_remote_temperature variables: temperature: float then: - lambda: 'id(${node_id}_my_climate).set_remote_temperature(temperature);'

- service: use_internal_temperature
  then:
    - lambda: 'id(${node_id}_my_climate).set_remote_temperature(0);'

ota: password: !secret ota_password

wifi: ssid: !secret wifi_ssid password: !secret wifi_password power_save_mode: none

Enable fallback hotspot (captive portal) in case wifi connection fails

ap: ssid: "${friendly_name} Hotspot" password: !secret wifi_fallback_ap_password

captive_portal:

web_server: port: 80

external_components:

• source: github://nathanjw/esphome-mitsubishiheatpump@unformat-select

climate:

• platform: mitsubishi_heatpump #name: ${friendly_name} #id: hp id: ${node_id}_my_climate # Use a unique id name: ${node_name}

  vertical_vane_select: name: Vertical Vane

  Optional

  hardware_uart: UART2 baud_rate: 2400 update_interval: 500ms

  Supported features

  supports: mode: ["HEAT_COOL", "COOL", "HEAT", "FAN_ONLY", "DRY"] fan_mode: ["AUTO", "LOW", "MEDIUM", "HIGH"] swing_mode: ["OFF", "VERTICAL"] visual: min_temperature: 16 max_temperature: 31 temperature_step: 0.5