Supergiovane
Hue Temperature not set in night mode if brightness is 0% (off)
Hi, I have a problem using night mode.
WHAT I SET day: turn on at 100%, 3500K night: turn on at 0%, 2200K this because in the same GA some lights will turn on at 5%, other at 0% but ready (tempertature) to be dimmed up with the other at 5% if I need to increase the total light in a soft way.
WHAT I GET day: turn on at 100%, 3500K night: turn on at 0%, 3500K I will start dimming and the 0% light will go to 5%, aligning the birghtness with the other in the same GA, but they will be at 3500K
It seems that if a brightness is set to 0, no temperature is passed. I don't know if Philips API want the light to be >0% for passing the temperature. Thank you!
Hi Enrico i don't have forgot... i'm just a little busy...
Absolutely no worries! Have a nice day!
Should be fixed with [email protected] out now. Bye.
Sorry but the behaviour is still unwanted: now the light set to "0% off" is turning on at 5%. The light is a GU10 white (Hue ambiance spot).
Hi Setting color temp while lamps are off, is not allowed by the hue api’s, so i had to pass ON with 0% dimming and the Kelvin temp. If it is incasinating your lights, i need to follow another route…
Hi Enrico Are you able to paste some files into your Node-Red machine? If yes, please uzip the content of this ZIP knxUltimateHueLight.js.zip into your .node-red/node_modules/node-red-contrib-knx-ultimate/nodes folder and restart node-red. Then let me know. Thanks.
Ok, tomorrow I'll have all the time for doing this.
Il 26 marzo 2024 10:18:14 CET, Massimo Saccani @.***> ha scritto:
Hi Enrico Are you able to paste some files into your Node-Red machine? If yes, please uzip the content of this ZIP knxUltimateHueLight.js.zip into your .node-red/node_modules/node-red-contrib-knx-ultimate/nodes folder and restart node-red. Then let me know. Thanks.
-- Reply to this email directly or view it on GitHub: https://github.com/Supergiovane/node-red-contrib-knx-ultimate/issues/338#issuecomment-2019901987 You are receiving this because you authored the thread.
Message ID: @.***>
Hi, unfortunately the behaviour is returned as when the issue was opened. But... If the API don't support that, don't worry. You don't should fix philips issues... ;-)
Hi Enrico I've tested again with grouped light and it works flawlessy.
Hi Enrico Does your GU10 belonging to a group, or are they alone?
It is not a hue group, both ligts (5% and 0%) share the same GA.
Hi Enrico I've tested again with grouped light and it works flawlessy.
Are you sure that I had to deploy only one file?
You did it! You won! 😜👏🏻🍾
(Please, contact me in pvt - I don't know how to do that - I promised some chinotto to you)