SunResearchInstitute
v1.1.1 crasht Atmos 0.12.0
Hello@all I have a problem. On my Switch FW 10.0.2 with atmos, atmos crasht complet, whe i try to open sys-clk-Overlay v1.1.1. My systemmodule are only, sys-clk and Tesla. 01590925677_420000000007e51a.log With v1.1, i dont have problems.
I also am running 10.0.2 and have the same issue (renamed config from ini to txt because github didn't like it being an ini) now launching a game I have a config setup for works. (ie i have ion fury setup via the config editor nro and it seems to work fine) but the second i open the overlay instant crash.
01590952761_420000000007e51a.log
In the /config/sys-clk/config.ini are only this: [values] ; Defines how often sys-clk log temperatures, in milliseconds (set 0 to disable) temp_log_interval_ms=0 ; Defines how often sys-clk writes to the CSV, in milliseconds (set 0 to disable) csv_write_interval_ms=0
; Example #1: BOTW ; Overclock CPU when docked ; Overclock MEM to docked clocks when handheld ;[01007EF00011E000] ;docked_cpu=1224 ;handheld_mem=1600
; Example #2: Picross ; Underclock to save battery ;[0100BA0003EEA000] ;handheld_cpu=816 ;handheld_gpu=153 ;handheld_mem=800
Can this be solved by rolling back an update and if so, would that cause any potential issues?
Can this be solved by rolling back an update and if so, would that cause any potential issues?
yes this is what worked for me and been using it for a couple days no issues. So just roll back a version until the issue is fixed. Cheers 🍻
sorry for the wait, this should fix the issues: https://github.com/Sun-Research-University/sys-clk-Overlay/suites/753325834/artifacts/7760493
sorry for the wait, this should fix the issues: https://github.com/Sun-Research-University/sys-clk-Overlay/suites/753325834/artifacts/7760493
Installed it and it's still causing crashes. Will be rolling back to v1.1 again.
https://github.com/Sun-Research-University/sys-clk-Overlay/suites/753520155/artifacts/7764382 this should function properly
sorry for the wait, this should fix the issues: https://github.com/Sun-Research-University/sys-clk-Overlay/suites/753325834/artifacts/7760493
Sorry for not being clearer! I installed the fix posted above and when launching sys-clk-Overlay via handheld mode, it crashes the Switch. 01591244830_420000000007e51a.log
https://github.com/Sun-Research-University/sys-clk-Overlay/suites/753520155/artifacts/7764382 this should function properly
Still crashes for me. Here's another log. 01591246112_420000000007e51a.log
just got it here after updating, didnt matter if i had no config blank or pre-existing from using sys-clk editor. 01591318121_420000000007e51a.log
Please try this fix: https://github.com/Sun-Research-University/sys-clk-Overlay/suites/761957801/artifacts/7918844 (Haven't had time to test myself)
Please try this fix: https://github.com/Sun-Research-University/sys-clk-Overlay/suites/761957801/artifacts/7918844 (Haven't had time to test myself)
it crashes still even the older version crashes for me
Not sure if it is the same thing, but as soon as I click on the overlay option my switch reboots (no actual crash message)
I can confirm that v1.1 works on a clean vanilla install on AMS 12 with Horizon firmware 10.0.4
So, I had updated through the HB store and that caused the crash/reboot - updated directly from the files here and everything works, but it only shows as version 1.0 even with the latest file