home_assistant_solarman icon indicating copy to clipboard operation
home_assistant_solarman copied to clipboard

Home Assistant component for Solarman collectors used with a variety of inverters.

Results 243 home_assistant_solarman issues
Sort by recently updated
recently updated
newest added

can some one do a bluesun.yaml for bluesun inverter, all the .yaml file ive tested and all say disconnected

# Extended the service function: - service: write_holding_register/write_holding_registers allow selecting the device - service: read_holding_register/read_holding_registers added # General: - solarman.py / get_statistics - Reduced Warning messages in log files in...

Hi everyone, we just purchased a micro inverter. These are only powered by the connected solar panels, therefore they will disconnect once a day. Unfortunately this means, that every night...

Hi all, I see some issues coming up and it looks like all of them are not answered. So lets try to have one issue to explain whats needs to...

Hi, I made a integration for DTSD422-D3 smart meter using https://github.com/kbialek/deye-inverter-mqtt/blob/main/docs/metric_group_igen_dtsd422.md and it is working, ``` requests: - start: 0x01 end: 0x64 mb_functioncode: 0x03 - start: 0x65 end: 0xA1 mb_functioncode:...

I have this inverter SN 2300026682 with firmware LSW3_15_FFFF_1.0.65 that only works halfway with this integration, what happens is, I add it with the sofar_g3hyd.yaml, restart HA, and this is...

Dear, I received a new version of dataloger(Solis-S2-WL-ST) where are also letters between the serial number. Is looks like only numbers can be typed in the configuration of Solarman. Any...

I have inverter zcs model [Azzurro 1PH2200TL-V3](https://www.zcsazzurro.com/uploads/documetazione/Datasheet-ZCS-1PH-1100-3300TL-V3-EN.pdf), trying to use the various yaml I cannot get any data but get the error below, both with version 1.4.3 and 1.5.1, the...

Solarman not working after 2024.2 core upgrade