atemOSC icon indicating copy to clipboard operation
atemOSC copied to clipboard

Published 20 hours ago • verified publisher icon SteffeyDev

Hyperdeck Studio Mini runtime timecode display in TouchOSC?

Open editormixer opened this issue 4 years ago • 4 comments

hi, can someone explain how to get the Hyperdeck Studio Mini's runtime timecode to display in TouchOSC? I'm making a TouchOSC label using "/atem/hyperdeck/1/clip-time" and "/atem/hyperdeck/1/timeline-time" both with no luck. Any help would be appreciated. Thanks!

editormixer avatar Feb 04 '21 06:02 editormixer

Can you confirm that the Out IP Address is the same IP address as the iPad running TouchOSC and that the Out Port matches the port that TouchOSC is listening on?

SteffeyDev avatar Feb 08 '21 21:02 SteffeyDev

yes, the Macros correctly display their names and descriptions, and all other feedback is working. With the 4.0 update, both "clip-time" and "timeline-time" now display "00:00:00" (looks like frames are missing) but neither of these display actual time-just zeroes.

editormixer avatar Feb 16 '21 19:02 editormixer

Ok, I'll check it out and see if I can spot an issue. Don't actually have any hyperdecks to test with unfortunately.

SteffeyDev avatar Feb 17 '21 01:02 SteffeyDev

Are you getting other feedback from Hyperdecks, such as the state when you play or pause? Also, if you log all feedback do you see it, maybe with a different ID than expected?

SteffeyDev avatar Feb 28 '21 02:02 SteffeyDev