HA-FoxESS-Modbus

HA-FoxESS-Modbus copied to clipboard

I have been successfully using this code until recently. Unfortunately with HA 2023.9.1 I find that all the Modbus values are being displayed as nan and being listed as Unavailable...

Malcs91TF

Quick question about the BMS Watthours sensor;

26

Quick question about the BMS Watthours sensor; Should this be the same as the kWh (x1000) value that is available in the Foxcloud data report? If so then I think...

Daibutt

Do sensors need state_class: measurement

1

A number of the BMS sensors (11037, 11041, 11042, 11045, 11046) don't have state_class: measurement in their definition in modbusUSB.yaml so, as I undestand it, won't be storing any long...

TonyM1958

Default scan_intervals overwhelm the W610, causes problems in home assistant

13

From work done on https://github.com/nathanmarlor/foxess_modbus, we've found what the W610 supports one read about every 700ms (sometimes it can do one quicker). It's capable of reading 8 registers at a...

canton7

Scan interval

2

Just put a vote in for a review of scan interval settings? I use 30 seconds for most sensors, with 5 seconds for power sensors. For example, do we need...

TonyM1958

More H1 RS485 registers

26

Hi, I've found some more H1 RS485 registers: * 11070: PV total * 10 * 11071: PV today * 10 ... Presumably some in the range 11072-11078 are for charge...

canton7

Sensors showing Unavailable

2

I've just addded the integration to home assistant from my H1 invertor and i'm not recieving values for a number of sensors. Grid CT and CT2 as a couple of...

monkeytsar

Sensors need Unique ID values

4

Looking at sensors created by the integration in the settings area of Home assistant shows a message saying they can't be managed from the UI. Add Unique IDs to prevent...

StealthChesnut

System Losses sensor may be giving incorrect values

5

The system losses sensor using LAN config appears to be reading more like a current power generation figure, not a losses figure. In the USB config it may not be...

StealthChesnut

I raised an issue, but have now (i think) fixed it.

asayce