DxCore

DxCore copied to clipboard

Add automated tests of AVR DD-series parts

2

Once the ones that used to work work again.

SpenceKonde

DD support - broken in 1.4.10 and other problems in head of tree

6

1.4.10, build of the default sketch with empty setup and loop (avr64dd32): ``` In file included from /Users/username/Library/Arduino15/packages/DxCore/hardware/megaavr/1.4.10/cores/dxcore/Arduino.h:27:0, from /private/var/folders/jp/8cvzydc904n1td9j3y4ntcgm0000gn/T/arduino-sketch-B22E3CF43EDC1B13AEE9CC8CBE0E1CBF/sketch/sketch_jul2a.ino.cpp:1: /Users/username/Library/Arduino15/packages/DxCore/hardware/megaavr/1.4.10/cores/dxcore/core_devices.h:426:4: error: #error "Unrecognized combination of flash size and chip...

ObviousInRetrospect

Clash/duplication between Logic & Comparator libraries

5

Getting a compilation error if I include both the Logic and Comparator libraries. Probably a simple fix, but I don't know how/where. With minimalist program: ``` #include #include void setup()...

grandaspanna

Logic input modes that do pin init are broken (for IN0 and maybe IN2)

9

I was troubleshooting why the logic blocks were not seeming to work properly for me, and noticed that the bit pattern in the CTRLB register didn't line up with what...

alexferro

Improvements to pinConfigure

24

Due to limited time the last six months (I have two small kids now, life is busy...) I haven't been able to catch up to all the work you have...

MCUdude

Error Compiling for board AVR DB Series (Optiboot)

6

Designed my project around the arduino mega. Switched to the AVR128DB64 due to supply issues. I believe I successfully uploaded the bootloader. When compiling the sketch in the Arduino IDE,...

cchimick

Sister Konde was angry with me and left me at the chalkboard to write this out... Datasheet UPDI Pies 32DB48 0x1E9535 0x1E9532

mosqu-ito

PROGMEM_SECTION Programming issues

1

When using PROGMEM_SECTION other than 0, I get verification errors. Using PROGMEM_SECTION1: pymcuprog.programmer - ERROR - Verify failed: Verify mismatch starting at location 0x008000: 0x07 vs 0xFF Using PROGMEM_SECTION2: pymcuprog.programmer...

alxgarza

Is what it says in the title.

xxxajk

Board Manager SSH Certificate Expired

2

Following the instructions [here](https://github.com/SpenceKonde/DxCore/blob/master/Installation.md#boards-manager-installation-now-strongly-recommended-unless-helping-with-core-development), I am facing an error after step 1 as the network connection cannot be safely established.  Manually checking, it indeed seems that the currently deployed...

MiWeiss