USBNova

USBNova copied to clipboard

Get firmware updates on the release page

For documentation, please visit: usbnova.com

Compile using Arduino-CLI

Install Arduino-CLI.
Add https://adafruit.github.io/arduino-board-index/package_adafruit_index.json to the additional board manager URLs.
Edit boards.txt in /packages/adafruit/hardware/samd/<version>/ and add boards.txt.

Compile and upload:
arduino-cli compile --fqbn adafruit:samd:adafruit_qtpy_m0_nova:usbstack=tinyusb,debug=off -u -p <PORT>

Compile and export:
arduino-cli compile --fqbn adafruit:samd:adafruit_qtpy_m0_nova:usbstack=tinyusb,debug=off --output-dir build/

Convert to uf2:
uf2conv build/USBNova.ino.bin -o build/USBNova.ino.uf2
(To install uf2conv, install rust, then cargo install uf2conv)

For RP2040:
arduino-cli compile --fqbn rp2040:rp2040:generic:flash=16777216_15728640,usbstack=tinyusb --output-dir build/ (usually not required, but just in case: elf2uf2-rs build/USBNova.ino.elf build/USBNova.ino.uf2) (To install cargo install elf2uf2-rs)

For Adafruit Trinkey RP2040: arduino-cli compile --fqbn rp2040:rp2040:adafruit_trinkeyrp2040qt:flash=8388608_7340032,usbstack=tinyusb --output-dir build/