SoftFever comments

Results 202 comments of


                                            SoftFever

trafficstars

Port "No Unsupported Perimeters" feature from SS

Some testing results: ![Screenshot 2024-01-28 at 9 17 14 PM](https://github.com/SoftFever/OrcaSlicer/assets/103989404/54a6eb6d-2a0a-48e6-a01f-a70e01908281) ![counterbole_hole2](https://github.com/SoftFever/OrcaSlicer/assets/103989404/2175cad7-d72b-4d44-816d-4af5a9efd93e) ![counterbole_hole](https://github.com/SoftFever/OrcaSlicer/assets/103989404/c11d8ffb-00f6-413b-8be2-8e0c86b8b250)

1.9.0 alpha Crashes when color painting

Thanks for reporting back. Does it crash consistently?

V1.9.0 Alpha Linux crashes when sending file to SD card

Yes, and I have fixed this issue. Will release 1.9.0 official soon

V1.9.0 Alpha Linux crashes when sending file to SD card

Fixed.

Wipe Inside at Start/End of perimeter (from SuperSlicer)

I will try to port this feature in 1.9

Wipe Inside at Start/End of perimeter (from SuperSlicer)

> @SoftFever if you haven't made a start at this one I'll try to port it over tomorrow. No, I haven't started this. I'm still ghosted with the sudden Mac...

ENH: Port of "wipe inside before extruding an external perimeter" feature from super slicer

> @igiannakas Thanks so much for implementing this! It made a big difference in my first test print. > > > > Wipe before external loop enabled on the right:...

"Only one wall on top surfaces" can cause artifacts for small features on top of the surface (lettering issue)

@psiberfunk You can play around with the "One wall threshold" to get the desired result. The parameter is added for such edge cases ;) In some models we want to...

"Only one wall on top surfaces" can cause artifacts for small features on top of the surface (lettering issue)

> Hmmm I have crossed this issue on the past, opened a ticket and I was told to disabled one wall on top surface for some models. Not great but...

Add configurable short wall/perimeter cleaning for Arachne

> How come you're not using this variable for the top most layer? Avoid leaving holes/gaps on top surface. He added an comment in the codes to explain it.