SoftFever

> (rebased) > > > Thank you! This is cool. > > Thank you, let me know if you want some changes! I don't have IP cam so I can't...

I see nothing wrong in the gcode. I noticed you set the line width to 2mm and 0.8 layer height, this setting is "out-of-range" for a 0.8mm nozzle to perform...

> Hi @SoftFever, thanks very much for your response. I know my settings are quite extreme, but the actions of the printer when used are indicating an actual pause rather...

Hi @CCS86 Orca remember filament and process configurations for each machine. When you switch to a new machine, you can config them once for the new machine. They will be...

@CCS86 I've added an option to disable the per machine configuration behavior. https://github.com/SoftFever/OrcaSlicer/pull/4930 Let me know if it works

Hi @RyanWhipple Thank you for your investigation and for taking the time to include such detailed information in this PR. Regarding the printable size, I've also heard about this issue...

> Hi @SoftFever Thanks for the review. I went back, took some more measurements, and looked at this with some fresh eyes. > > * The build plate's square area...

> @SoftFever I pushed the changes to keep origin at 0x0. Thank you for your work! Merged.

@yw4z What's the status of the PR? Could we remove the `x` sidenote?

Hi @yw4z Thanks for taking the initiative. Just a quick heads-up: It'll take me some time to start reviewing the designs.