During Multi Material Printing - Maintain Bed Temperature of Filament with highest Bed Temperature requirements.

[Durahl]

Is there an existing issue for this problem?

• [x] I have searched the existing issues

OrcaSlicer Version

2.3.0

Operating System (OS)

Windows

OS Version

Win11

Additional system information

🚫

Printer

Voron V2.4

How to reproduce

Create a Multi Material Print with two Filaments touching the Build Plate using different Bed Temperatures for BOTH First and Other Layers ( for Example Filament One uses 105°C & 100°C, Filament Two uses 85°C & 75°C ).

Orca Slicer will indeed maintain the 105°C for both Filaments on the First layer but will then use the Second Filaments 75°C Other Layers value resulting in the Part prematurely peeling off the Build Plate.

Actual results

See above ⬆️

Expected results

Maintain the Bed Temperature Values of the Filament with the highest requirements - Perhaps issue a Warning.

Project file & Debug log uploads

Project.zip log.zip

Checklist of files to include

• [x] Log file
• [x] Project file

Anything else?

2h to get the Blob of Death off the Hotend buried inside because of this issue... 💢