SoftFever
Calibration with PA Pattern freezes OrcaSlicer
Is there an existing issue for this problem?
- [x] I have searched the existing issues
OrcaSlicer Version
2.3.0
Operating System (OS)
Windows
OS Version
Windows 11
Additional system information
No response
Printer
Bambu P1S
How to reproduce
Calibration - Pressure Advance - DDE - PA Pattern - OK
Actual results
After clicking on OK, OrcaSlicer doesn't load the PA Pattern test file an freezes. Every other PA test works fine. Since 2.3.0 Official Release the PA Pattern test method freezes OrcaSlicer. 2.3.1 and the nightlys freezes also. Before 2.3.0 it works also fine.
Expected results
The PA Pattern test should generate the calibration file.
Project file & Debug log uploads
debug_Tue_Mar_25_07_47_26_37568.log.0.zip
Checklist of files to include
- [x] Log file
- [ ] Project file
Anything else?
No response
The whole folder from %username%\AppData\Roaming\OrcaSlicer?
Yes. You could email me if you don't want to/too large to upload to Github.
The file size is about 45 MB. Your E-Mail provider says it's too large.
Weird... I have a few hundred GB of google cloud storage left, that shouldn't happen. Could you share it via google drive/mega then?
Hmmmm odd. Not able to reproduce the crash on my side. Just to confirm, does the selected profiles affect the result on your side? E.g., does changing those values make any differences?
No, changing the profiles doesn't have any effect. Tested OS 2.3.0-rc and to this version it works without problem. Copied the pa_pattern.3mf from resources\calib\pressure_advance to the newer versions, but doesn't change the problem. Don't know why.
Tested OS 2.3.0-rc and to this version it works without problem.
2.3rc works fine? That's even more weird...
Now i figured out, when i set values to acceleration and speed in the settings and don't let them empty, the pattern is generated and OS don't freeze. Don't know why i have such a bug.
Now i figured out, when i set values to acceleration and speed in the settings and don't let them empty, the pattern is generated and OS don't freeze. Don't know why i have such a bug.
Same for me
The same for me, it still worked with the 2.3rc. If I enter the values manually, it does not freeze. I have also tried to use a completely new profile with the portable app but get the same error.
I have the same problem with 2.3.0 final. What I noticed is that with 2.3.0-rc, after confirming OK, some values in the slicer, layer, etc. are changed. However, with 2.3.0 final, this doesn't happen and it freezes.
Same here... Windows 11, Orca Slicer 2.3 and PA pattern test freezes orca slicer.
In the mean time, which accelerations/speeds should I put there?
Whatever accel/speed you want the test to run at. Enter multiple values separated by comma generate multiple tests on one plate so you could test different accel/speed combinations at once.
I have the same issue on a windows 11 machine. Leaving speed and acceleration empty freezes the programm
Hello. I have the same problem. I only have this problem with the PA pattern. When I press OK, the profile disappears on the left and Orca freezes. I am attaching the log file.
debug_Wed_Jun_11_16_42_43_18776.log
Unfortunately, the problem still persists. I started with a fresh installation. No changes to the settings. I have attached the folder from APPDATA.
Microsoft Windows 11 Pro
Version 10.0.26100 Build 26100
Betriebsystemhersteller Microsoft Corporation
Systemname GAMING-PC
Systemhersteller Micro-Star International Co., Ltd.
Systemmodell MS-7E12
Systemtyp x64-basierter PC
System-SKU To be filled by O.E.M.
Prozessor AMD Ryzen 7 7800X3D 8-Core Processor, 4201 MHz, 8 Kern(e), 16 logische(r) Prozessor(en)
BIOS-Version/-Datum American Megatrends International, LLC. 1.J0, 04.07.2025
SMBIOS-Version 3.7
Version des eingebetteten Controllers 255.255
BIOS-Modus UEFI
BaseBoard-Hersteller Micro-Star International Co., Ltd.
BaseBoard-Produkt MAG X670E TOMAHAWK WIFI (MS-7E12)
Is this problem resolved? With the current version 2.3.1, I still have the problem that Orca freezes.
