SoftFever
counterbore options do not work over certain inner wall line width
Is there an existing issue for this problem?
- [X] I have searched the existing issues
OrcaSlicer Version
2.1.1
Operating System (OS)
Windows
OS Version
Windows 11
Additional system information
No response
Printer
Cr10v2
How to reproduce
choose any option for counterbore holes and have inner wall thickness ( in my case) over .794 on a .6 nozzle normally I have my inner walls at .85 but would at least like to be at .8 but if i do that counterbore options dont work at all. the closer you get to .8 the less partial works
Actual results
no counterbore walls are generated
Expected results
generate counterbore walls
Project file & Debug log uploads
CR-10v2 _ easy X linear rail.zip
Checklist of files to include
- [ ] Log file
- [X] Project file
Anything else?
happens on all models nozzles and printers once you go over that inner wall thickness ( was able to get SLIGHTLY higher on another printer but will not go to .8/ over only time I was able to get over was selecting a .8mm nozzle and it's still max of .837 doesn't seem to be a percentage as .4 .6 and .8 all are roughly within .05 different before it breaks
