Color Change sections put part cooling at 100% not respecting filament profile

[jxer]

OrcaSlicer Version

1.9.0

OS version

11

Additional system information

No response

Printer

A1

How to reproduce

put 2 petg colors make a color change, check fan speed shows at 100 during the color change sections, not respecting filament profiles (20-35) for petg

Actual results

fan at 100% through color change sections

Expected results

should respect fan speeds, bambu 1.8 is not doing this.

Project file & Debug log uploads

nozzle-container+disc-a1_fan.zip

Checklist of files to include

• [ ] Log file
• [X] Project file