Multi bed Temp issue

[bhast2]

OrcaSlicer Version

1.9.0

OS version

Windows 11

Additional system information

Amd Ryzen 5800X, 32G of ram. MSI Geforce RTX 2080 Gaming TRio

Printer

K1Max

How to reproduce

Toggle to use Multi Bed types and pick Smooth PEI Plate, Slice model and send to printer it will heat the bed up to 100 degrees instead of what is in the setting for bed temperature

Actual results

The bed will heat up to 100 degrees instead of 60 degrees

Expected results

60 degrees on the bed temp

Project file & Debug log uploads

croc boot.zip

Checklist of files to include

• [ ] Log file
• [ ] Project file

[bhast2]

I want to add to this if I uncheck Activate temperature control in the filament the issue goes away

[DVSVIDEO]

For each material type, the specific temperatures for the sheet type are displayed. Have you checked what is set there for the smooth surface PEI sheet?

[bhast2]

For each material type, the specific temperatures for the sheet type are displayed. Have you checked what is set there for the smooth surface PEI sheet?

Yes and they say 35 degrees on the smooth. but it still goes to 100

[Sharkooon42]

I have the same problem.I Print with the textured PEI sheet settings. The slicer takes the First Layer temperature from the smooth PEI sheet setting for the first layer, and from the 2nd layer onwards, it takes the temperature from the textured PEI sheet.

[vgdh]

Slicer doesn't change bed temperature for upper layers https://github.com/SoftFever/OrcaSlicer/issues/4676

[Sharkooon42]

I have corrected my old post again for better understanding because it is not the same...