OrcaSlicer Add Elegoo Neptune 4 Plus Printer Profile

Please add elegoo neptune 4 plus printer profile, I already try to print on elegoo neptune 4 plus with elegoo neptune 4 max printer profile (adjusted size), but I see some error / warning in fluidd console. So I will be glad if the printer profile is officially added, thank you.

Nov 08 '23 12:11 sebastianbagya

This would be amazing

Nov 12 '23 22:11 Axil94

Need this

Nov 13 '23 19:11 CINCOxBINCO

would also be interesting :-), because it is really missing.

Nov 14 '23 18:11 prisma7411

same problem here, need this.

Nov 18 '23 13:11 MathiasKrill

+1

Nov 19 '23 06:11 YvesSun23

This would help me as well :)

Nov 20 '23 07:11 BlazS14

Need this :)

Nov 22 '23 21:11 BarleyBrewhammer

Please, don't want to subscribe to "Uncle Jessy" Patreon, who Elegoo pays already.

Nov 23 '23 14:11 Badwolf7691

Thanks Badwolf7691

i need also the profile for the new neptune 4 + but i don´t want to buy a membership to get this from "uncle Jessy". Especially not when elegoo is paying him.

Nov 23 '23 21:11 AE3D-A99

Thanks @Badwolf7691 for the hint with that Uncle Jessy, i paid the 2$ to get a good working profile. Without that i would not be able to use orca - thank you ! UPDATE: That Uncle Jessys profil is trash for the printer everything i try out is trash.

Nov 23 '23 22:11 MathiasKrill

Please, By the gods of 3D Printing Add an Official Neptune 4 Plus profile! The Max profile with changed bed size doesnt seem to work right hinting at something else different with the Plus and Max.

Nov 27 '23 21:11 GeneralDraga1701

Thanks @Badwolf7691 for the hint with that Uncle Jessy, i paid the 2$ to get a good working profile. Without that i would not be able to use orca - thank you ! UPDATE: That Uncle Jessys profil is trash for the printer everything i try out is trash.

how do you import a profile like uncle jessy to orca? Im still very newish.

Nov 27 '23 21:11 GeneralDraga1701

Just a psa for anyone using the n4 max profile on the n4+. I dont know why but i think that the fan structure on the backside of the y axis gantry isnt accounted for in the extruder size settings, so any prints that have the print by part setrring enabled (not by layer) may bump into previously printed parts on the bed. Otherwise the modified max profile with smaller bed dimensions works great for me.

Nov 27 '23 21:11 BlazS14

Here i made a profile for the EN4P, try it out. no guarantees :) https://github.com/w34sel/3D-Printing/tree/main

Dec 02 '23 11:12 w34sel

Here i made a profile for the EN4P, try it out. no guarantees :) https://github.com/w34sel/3D-Printing/tree/main

Im waiting for the plus to arrive, is this working nice for u ppl?

Dec 03 '23 00:12 vaxkun

I also have a PR for an initial add of a profile that has been working really well for me over the last week. https://github.com/SoftFever/OrcaSlicer/pull/2980

Dec 04 '23 02:12 Kalooth

Here i made a profile for the EN4P, try it out. no guarantees :) https://github.com/w34sel/3D-Printing/tree/main

Hi, Thanks @w34sel for the Profile, I directly installed it.

One Question, and please excuse if it sounds a little dumb I am new to the Game, why are the Speedsettings so low? I get it for the first layer, but why are the other layers at 80 or 100? Till now I printed with the Neptune 3 Plus Profile and the settings were also very slow. Thought 250mm/s is recommended by Elegoo.

Can you tell me, what is best?

Dec 05 '23 07:12 CreativeLens

@CreativeLens, the N4 Max profile that people usually say to copy and just change the bed size is running with those slower speeds. I've been running with my PR, https://github.com/SoftFever/OrcaSlicer/pull/2980 for over a week and haven't had any issues yet but... I'm a sample size of 1 so let me know if you give it a shot and if you run into issues.

Dec 05 '23 07:12 Kalooth

@CreativeLens I chose that speed because it was the same for the N4pro and N4Max standard profile, so I thought it would be nice to maintain consistency by using the same values across the profiles. However, you can certainly use a higher speed if desired.

You can tweak it for each print.

Here is a small image marked with different colors: Blue: Outer wall Orange: Inner Wall Purple Top: Surface Red: Sparse Infill White: Internal solid ( imagine this is fully printed)

fdm-sparse-fill-3

Dec 05 '23 07:12 w34sel

@w34sel Hello,

Brand new here in 3D printing ! Thanks for the profile, I downloaded it and installed it. I saw that the bed size is 330x330 in your profile, however the bed size for the Neptune 4 plus is 320x320. Is that normal or is that a mistake ?

Thanks !

Dec 09 '23 16:12 francois-thi

Hi,

I think it is a mistake, but the Profile is from @w34sel :)

Dec 09 '23 16:12 CreativeLens

@francois-thi I have copied the dimensions of the bed from the cura 4 elegoo profile for the n4plus

Dec 09 '23 17:12 w34sel

@francois-thi If you measure the bed manually then it will be 330x330. Was suprised too, but had to replace the PEI Plate, so i know ;)

Dec 20 '23 07:12 helmanis

@helmanis Oh, thanks ! I didn't notice that :p

Dec 20 '23 09:12 francois-thi

Does this Orca profile work well? I am tired of the Elegoo Cura I am having issues that seem slicer related because if I print anything that Elegoo sliced like the Buddha or Flower pot it comes out perfect so it tells me the printer is mechanically sound.

Dec 23 '23 16:12 Shotgun-Monk

@w34sel, Thank You for making the Orca slicer profile. It is working great, better than the Uncle Jessy profile TBH.

Dec 24 '23 01:12 Shotgun-Monk

Thx man :D https://github.com/w34sel/3D-Printing/

Dec 24 '23 05:12 w34sel

@Shotgun-Monk Hey, yes it's working great ;) I'm using it since a couple of weeks now, and I had no problems at all.

Dec 30 '23 12:12 francois-thi

Can i make one question @w34sel?So what are the differenc between your profile and th stock neptune4 plus orca profile?🤔🤔

Jan 16 '24 20:01 Georgelou35

@Georgelou35 Is there any Neptune 4 plus profile in Orca ? I couldn't find one, only the Neptune 4 pro.

Jan 16 '24 20:01 francois-thi