Add a “Ignore/Emit in gcode” function in Printer setting/Motion ability

[jiiimi]

Is your feature request related to a problem? Please describe. I still have to edit my gcode manually to remove these lines: ; EXECUTABLE_BLOCK_START M73 P0 R23 M201 X0 Y0 Z0 E0 M203 X0 Y0 Z0 E0 M204 P0 R0 T0 M205 X0.00 Y0.00 Z0.00 E0.00 ; sets the jerk limits, mm/sec

Which printers will be beneficial to this feature All

Describe the solution you'd like Add in Printer setting/Motion ability a function "Ignore / Emit in gcode" which allows you to choose if you want to customize Motion ability or if you want to use the default values of the firmware. Or By setting all values to zero this is not taken into account in the gcode (this is not currently the case)

[Duncro]

Yeah, overrides whatever I have on the printer. Biggest annoyance is when I fiddle with settings mid print on the printer, and I click save, then it saves these settings overwriting what I had on the printer (forcing met to start from scratch, making orca slicer a complete no go for tuning your printer and usually forcing you to start from the beginning). These should not be forced slicer specific settings and you should at least have the option to omit this from gcode automatically.

[github-actions[bot]]

GitHub bot: this issue is stale because it has been open for 90 days with no activity.

[github-actions[bot]]

GitHub bot: This issue was closed because it has been inactive for 7 days since being marked as stale.

[Dosclic98]

Yeah I think it would be usefull!

[Nocentinia]

Hi guys, I solved it by putting “Maximum acceleration for extruding” to 5k. The limits of my printer on klipper are 7k and in slicing I set 3k

[jbjhjm]

oh how I hate that stupid stale github bot. This is an important bit missing for everyone who doesnt want to have the slicer mess up printer configuration.

Edit: I was wrong. For everything coming by, this function is already available. Uncheck "Emit limits to G-Code" on Motion Abilities page.