So'6 Rallye

Use this reference for your motherboard : https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/master/hardware/BTT%20SKR%20MINI%20E3%20V3.0/Hardware/BTT%20E3%20SKR%20MINI%20V3.0_PIN.pdf You need to use E0-STOP and PWR-DET Cable red and blue go to E0-STOP Cable green and black go to PWR-DET red...

same problem here, I will work on it today.

The status light on the sensor from blue to off multiple times during the print is normal. if you can print without issues your config is ok.

this is my config for BTT E3 RRF motherboard: --------------------------------------------------------------------------- [filament_switch_sensor switch_sensor] switch_pin: ^PC3 pause_on_runout: False runout_gcode: PAUSE # [pause_resume] is required in printer.cfg M117 Filament switch runout insert_gcode: M117...

it's already in main branch.. I've made this push